Recent content by Edufixer

Hi i have use wedi board behind shower enclosure board for my ensuite. However deapite my prepibg the pattition wall behind my shower encloaure door fixings are missing the wooden partitions i instled ro screw into. Therfore i need to support this with fixings into acryllic shower board stuck...

Excellent thanks for the replies

Great thanks but will the concrete cause problems with extension and cracking on the pipe?

I have discovered that rats and mice are getting into the fabric of the house through a gap next to the toilet so pipe outlet the brick was never finished. See photo. What is the best way of blocking this gap all the way around the pipe to stop the rats and mice?

great thanks

i am renovating ensuite and hsve stripped out all old copper pipe for plastic, removing the earth bonding with it. however 2 questions 1. the bonding earth i took out was not connected at the othe end just a cut wire, is that correct? 2. there is 1 central heating pipe running under the toilet...

the top insolation valve in the picture is the ensuite shower cold water feed. i am rennovating ensuite. This valve doesnt work anymore. i want replace the feed into ensuite with plastic pipe for ease of install. also new shower unit is 15mm pipe old is 22mm. the valves are in airing cupboard...

the tap ia a mixer tap, its has become furred up and i need to replace the tap heads/mechanism sontheybcan turn creely again. the tapsbare very difficult to get to as they are against the wall on the far middle side of the bath. Any idea how to proceed? thanks i advance

I need to fix the cracks forming on my external render around and below this window. it is on the line of the old garage door when it was converted. what mix should i use to get a matched eff ect with the rest of the wall render. Also this window does not have a v shape aboce the window to...

So fitting a surrey flange woild be the way to go?

Is it ok to connect hot feed from shower pump from tank by teeing from the outflow at top of tank. See picture. Thanks

I have a 4mm 3 core SWA cable approx 70ft runming from plug socket in house. This has fused spur and switch on outside of wall and runs to a outdoor style double socket in summer house. The ring is on a 32amp breaker. I have run electric lawnmower on socket. Due to lockdown have brought kids...

Good point

Thanks for letting me know

RCB and MCB