I have a large concrete drive which is solid although bloody ugly and holds water in a couple of spots.
Can I cover it with tarmac and if so how deep would it need to be concerned about height to lawn and DPC against the house.
Hi Lectrician,
Just outside Exeter all flooded all around go 3 miles each way and as dry as a chip,going to try and get an electricain in the morning to test the ring.
quote="Lectrician";p="917000"]Where you to garygttdi?
Had nothing but sun here in Croyde since midday!
Not a...
Hi just got home from work to find a ring main mcb tripping 32amp I think. We have just had a massive rain storm,however I do not have any outside power. I have disconnected all appliances on the ring and not made any difference.
If water has got in the only place I could see is a low air...
Which should I do first tile the walls and then fit shower and cubicle to the tiles or do I fit the shower and screen first and tile to them. It’s a walk in shower 1700 mm longs against two std work walls, which have been plaster boarded. Both walls are good and solid with decent 4x3 studs. How...
Hi can anyone help my hot water expansion tank is constantly overflowing,I have checked the ball valve and its fine. It looks as though the system is overfilling and then draining back into the tank.
It has been suggested by a friend that the pump is overpumping what is this. I have checked...
can I fit a couple of double rads in place of the singles I have in a couple of rooms,I beleive the boiler can cope with the extra demand.
WB Greenstar 24Ri
Is it possible/legal to run my new feed behind coving,as like others I need to run through the dinning room and the kitchen to get to the boiler.
Will 28mm fit behind a conventional bit of coving,anyone tried?
Current run leaves the meter in 22mm but arrives at the boiler in 15mm,although I...
just had new boiler fitted and on filling system the auto bleed vale in the airing cuboard was venting lots of trapped air. problem is its now venting water not a lot but a pain in the airing room,can it be repaired or should I get plumber to replace it?
Have a new WB Greenstar 24CDi combi boiler installed in a 4 bed house with 4 recep and two bathrooms all showers are elctric so no demand.
New double galzing fitted.
Will boiler cope with the size of house?
A couple of the rads struggle to get the room warm,so I am looking to change a...
Hi guys lets not gets off on the wrong foot with this one,I trust all tradesman that work for me with respect and courtesy its just a shame its not reciprocated. If a price is agreed for a job to a given quality I pay.
My problem in this case is the boiler has not been commissioned, and it...
:( :( I have just had a so called professional plumber around to install a new system boiler. He fitted boiler then left saying I do not do electrics,so boiler does not work. I guess I can get this sorted by finding a electrician.
However what worries me is the way the boiler is plumbed in...
Why is my boiler bounching in and out,it fires up then cuts and almost instantly re-ignites and goes on doing this all the time if I let it. First repair man said it was the air pressure switch and orderd one and fitted it. All appeared fine for an hour or so after he left and then it started...
Thanks guys ,getting the message that it not the boiler that matters as long as its reasonable quality its the installation that will make all the difference. Frankly not botherd about manufacturing location was more conscerned about getting spares in the future. I suspect I am just worrying to...