Folks, after youe advice
I've just replaced all the iron guttering on the back of the house with new wicked pvc guttering - the issue has come when I've tried to connect to next doors (terraced houses). My neighbour seems to have a similar shaped half moon shaped gutter (112mm dia.) but a...
Hi guys,
Taken an image of the back of the old programmer (and also of the new backplate which I haven't mounted)
The system runs off a gas boiler, connected to the HW tank and CH via 3 way valve
Hi,
Old programmer was blank one morning, replaced timer unit, then realised it was the 3 amp fuse next to the boiler, replaced that fuse - and the new programmer is up and running. (I did try putting back the old timer, but it tripped the house and blew up)
I am currently using the old...
Cheers bud - Is there any way a cartridge can be repaired? I'm reasonably handy with things - Is it something that could be cleaned out?
Otherwise think I'd look at a new shower with parts prices I've seen - upgrade the whole electrical system and connect it directly to the MCB (Currently...
Hi Folks,
Got around to trying to sort out the shower unit in the house - It's got hot and cold water feeds (Hot water feed from HW Tank around 3m away), with the hot water pipe in to the back of the unit very hot to touch, but we have the heat setting on 9/9 with heat boost and it's only...
Hi folks,
Been up on the roof to measure up for capping a chimney, and the stack has a recess as opposed to a pot sticking out. How would I can this? Would it need to push down into the recess?
225mm ID, 254mm depth