I do not know if they are cheaper, but today I visited one of my friend and whyle I was there my friend had a surveyor from one of ECO4 grant scheme , and the surveyor told my friend that the scheme is only to replace and supply cobi boiler only and not system boiler, but survyor was not too...
Is it possible to install a combi in place of a system boiler by doing some necessary changes (plumbing or electrics)
and still keeping the Megaflow, Just curious
So , shall i remove this elbow valve and replace it with a one with a pressure guage attaced to it " the proper one 175528 ", I double checked and can not trace a pressure guage attached to the system. Do this flow valve comes with a new boiler or purchased separatly?
Hello there
My daughter just purchased a house and she had a plumber to replace 2 radiators
After bleeding system and radiator fitted, plumber couldn’t find pressure gauge on the system
Here are some photos . Ideal es38 combi
Any suggestions
I have an old type CL210 Heatrea Sadia with only bottom element fitted and a blank insert on the upper position.
The part has been ordered according to HS 95606964 but when the enginner come to fit the elemnt said that the brass boss with the new element is different from the bottom one...
Fixed
The engineer ingected fernox F3 Express and all in working order now.
My question is how long can I keep thernox inside the system, do I empty it and let refill till I get clear watr out or will it need to power flush it?
Just had visit this morning by the beasi engineer to solve the above problem.
I thoght he was going traght away to replace the heater exchanger, but he recon that if he put some chemicals to the heating system might solve the problem.
If not he said we need to flash the all system, if so he...
Yes, I only relised this today That I used 4 core phone wire and I'm unable to replace it due to plasterboard and timber on the new ceiling detector.
Original cable on the expander are yellow and blue and the new one comming from new detector are r/w and bl/w