Recent content by moggy74

  1. M

    GLOWORM FLEXICOM CX30 NO HOT WATER

    Hi,we dont seem to have anything coming out of the hot water taps,cold water is fine also heating is working fine,boiler pressure is approx 1.2 bar,everything was ok last night,any ideas please
  2. M

    STOP ENDS?

    yes john guest type push fit
  3. M

    STOP ENDS?

    yes push fit type (plastic if that makes a difference)
  4. M

    STOP ENDS?

    Hi,sorry but a real basic question,do stop ends come off pipes easy without any tool? Thanks
  5. M

    PIPE CENTRES FOR SHOWER VALVE

    HI,on exposed valve mixer mixer showers are the pipe centres fairly standard at 140 to 160mm,as having bathroom re furb,new pipes for shower are in (roughly),tiler is on the way and ive not bought the shower yet....doh......basically dont want it tiled then find out ive got to move the...
  6. M

    WHO IS RESPONSIBLE FOR INCOMING GAS PIPE?

    would the new boiler still work ok,if i had to have the upgrade on the incoming pipe at a later stage?
  7. M

    WHAT CAN I EXPECT TO PAY FOR PLASTERING PLEASE?

    Hi,Im in the East midlands,looking at having my bathroom (7ft X 8Ft) walls and ceiling skimmed before new bathroom is fitted,what would an average price be please,all walls are basically sound with no crumbling..ive had quotes ranging from 100 to 250 quid.... thanks
  8. M

    WHO IS RESPONSIBLE FOR INCOMING GAS PIPE?

    thanks for your reply,im having a Glow worm Flexicom CX 30 fitted,does my engineer need to do a flow rate test and see if its within spec for the boiler?
  9. M

    WHO IS RESPONSIBLE FOR INCOMING GAS PIPE?

    Hi,Im having a gas boiler fitted,the gas safe engineer has said that the 15mm lead pipe that comes up to the meter may need upgrading,who is responsible for this the gas board or me? i
  10. M

    OLD COPPER TANK AND PIPES?

    Hi,just taken my HWT out plus all the copper pipes,as having a combi fitted,whats the going rate in scrap value for this please...thanks
  11. M

    IS MY WORCESTER BOILER IN THE SCRAPPAGE SCHEME?

    hi i have a worcester hoppamat 45 solid fuel boiler fitted is this part of the scheme? many thanks
  12. M

    Digital room stat doesnt seem to start the boiler?

    Hi, I have fitted a Glow worm flexicom 30 boiler,and a boss digital room stat,(all new less than 3 months old)problem is the boiler has stoped working automatically from the stat but fires and works fine on manual overide on the boiler? any ideas thanks
  13. M

    HOTPOINT WT540P....???

    thanks,re bottom weights what am i looking for?,will they be attached in any way,what normally happens to the bottom weight?....ive seen the shocks ......not sure if the drum runs smooth,again what am i looking for here? many thanks ps did notice when i pulled the machine out last night there...
  14. M

    HOTPOINT WT540P....???

    yes the ball should be there also check the top weight and bottom weight is not loose, otherwise yes needs a new drum you cant get at these it a complete drum assy cost over 100.00 . thanks for the reply....ive checked the top weight this seems ok,also the springs are in place,cant see a...
  15. M

    HOTPOINT WT540P....???

    Hi..wonder if anyone can help...this machine makes a real loud noise on fast spin,sounds like a jumbo jet trying to land in the back garden...could this be a bra wire or are the bearings or shocks gone...how do i tell if the bearings are gone..also because of the vibrations the black pipe that...
Back
Top