Recent content by Staplebrau

Hi Lee thanks for asking! if he can great, but dont worry if not!! Its the browny colour; http://www.towertiles.co.uk/image/cache/duo%20gris-500x500.jpg Where are they based? If not then i can look at a courier (probably end up being the same cost as a full box - ha ha) Cheers...

I'll check the load and maybe try a 60w. and yes i meant switch...doh!! :oops:

Ideal! If he has a split box and wants to off load a few then that would be great!! let me know! Guy

Hi, I replaced a single socket with a dimmer last year. The light is a normal 40w bulb. once on it started flickering so i changed the bulb, but even with the new one its still flickering or coming on at full brightness. Any ideas what the cause might be? Cheers, Guy

Anyone know where I can hold of these - problem is I only really need 1 or 2 two tiles to replace some broken ones!!

it seems pretty tight but i'll take it off and swap it, its a new build so all the rads have the same. cheers

So we've had the central heating on and one of our radiators is going on full blast even with the trv value turned to the on position. I've tried it in various positions, but still the same - as hot as it goes! Is the trv value knackered or is it a simple fix? Just to note that its not a...

cool thanks. found what your refering too - http://www.wickes.co.uk/pvcu-hollow-soffit-board/invt/162643/?source=123_74

hi all, I've got a porch which at the moment is just an angled roof with a wooden bracket underneath. i want to box in the sides and bottom of the roof, to make it enclosed - so i can put an exterior spot lights in the newly created celing of the porch. I was assuming i could just use...

Good man, thanks for the advice - i shall try it later when i get in!

Our electric shower broke, so i've replace the unit with almost identical unit. The problem is that now i've installed one of the joints is still a bit wet, a droplet forms every minute - so its not a running leak or a major problem - but i want to sort it, to stop future issues or wasting...

i wanted to go for a uniform look and 'hide' the cupboard, buy making it flush, with push hinges. So was thinking it might look a bit naf with tiles!

Cheers John Had a quick look at their website and yes this is the ideal solution. However i'm going to use such a small amount of material that this wouldnt be cost effective really.

Hi All, Background - I'm going to create a countertop in my ensuite. the countertop is going to stretch the length of one wall (1.5m). I'll then sit a free standing handbasin on it. I'm going to create a front panel, under the counter top to conceal the basin pipes and toilet cistern...

Hi All, Background - I'm going to create a countertop in my ensuite. the countertop is going to stretch the length of one wall (1.5m). I'll then sit a free standing handbasin on it. I'm going to create a front panel, under the counter top to conceal the basin pipes and toilet cistern...