Main question it readability between a tamper loop and eol, i really dont want false alarms due to interference from an eol system, or it this not accurate to believe. im aware a loop system could be tricky to track down a fault but as its out buildings none of wiring is going to be plastered so will all be relatively easily accessible.
Am i incorrect in saying that loop system is less likely to give false alarms, i was thinking an open vs close circuit in more decisive.
Quick question my install is a bit unusual as it for out buildings, theres a long run then lots of sensors, ive got 6 core and was gonna run 1 door Eol and a pir eol (seperate zones) back through the 6 core is that ok?
heres basic schematic, ops sorry for scale, 2 pirs down stairs covering 2 smaller rooms, 1 rollers sensor back 1 roller sensor left and a door sensor upstairs (only access through that door)
Many thanks Joe
Am i incorrect in saying that loop system is less likely to give false alarms, i was thinking an open vs close circuit in more decisive.
Quick question my install is a bit unusual as it for out buildings, theres a long run then lots of sensors, ive got 6 core and was gonna run 1 door Eol and a pir eol (seperate zones) back through the 6 core is that ok?
heres basic schematic, ops sorry for scale, 2 pirs down stairs covering 2 smaller rooms, 1 rollers sensor back 1 roller sensor left and a door sensor upstairs (only access through that door)
Many thanks Joe
Last edited: