Hi, yes the module needs to be connected to the RS485 bus and to power. So, A goes to A and B to B. Then 0V and +12 V. The E080 module will be able to report events to SelfMon, but will not work with any apps. When you connect, the module should have a red flashing LED and the network LED's should light when connected to your LAN. The red led should give a slow on/off flash when not enumerated on the bus and a quick flash when enumerated. To add the module to the bus, wire it in, then enter and exit engineering mode to start the enumeration.
How do I Control Honeywell Galaxy 2-12 remotely?
- Thread starter alan333
- Start date
Sponsored Links
Thanks. I decided to order the SelfMon LCE as per your guidance. I appreciate the help you have given.
Thank you.
Thank you.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
