- Joined
- 10 Nov 2018
- Messages
- 11
- Reaction score
- 0
- Country
been trawling through a fair few threads and not finding anything with the same symptoms, so apologies if it's been covered before. Picked up a used lightweight B102 in a bid to not have to drag out the the old faithful K2 (which is still going strong after many years) to clean the car. Anyhow, the B102 cleaned up nicely. However switch the unit on and the motor comes straight on, without the water flowing. Use the trigger water comes out under pressure, release the trigger water stops and motor keeps running until its switched off. Use the trigger and you get a flow of water switch on unit and flow becomes pressured. Not investigated under the covers as yet, just researching if there is any point (cheap unit no replaceable parts). Not a show stopper by any means, if it can be fixed diy style, it would be a bonus.