Search results

Hi Chaps Is it possible to retrofit sealed units with integral blinds into existing upvc frames? I Have a large bathroom window and although it's obscure glass it is actually quite transparent! If they are available can you suggest a source? Many thanks!

Thanks for the reply, it’s greatly appreciated! Yes the red light did cycle on and off, I could tell the oven temperature was dropping because I could see I had to turn the know lower and lower to get the red light to come on over a period of time. I didn’t realise they had an overheat stat...

I’m not an appliance engineer but as an electrician I have replaced a few oven elements in my time. Anyway my own oven started playing up yesterday, was cooking for 9 people and it had been on about during the morning. During a critical time (just as I was getting the Yorkshire pudding in) the...

We actually discovered it when the customer asked us to tighten a loose basin hot tap. I isolated the cold into the boiler which should have isolated the hot taps but when my lad loosened the tap connector it was still running! We check all the other hot taps in the property and they were all...

Hi chaps. Just did a boiler change from vented to combi. The customer did have a shower which was running through a salamander pump. The pump has now been removed as it’s redundant but water is mixing in the shower valve and it’s affecting hot water performance dramatically at all hot...

Thanks that is actually very interesting, I have done a little of bit of work with Arduino in the past and in the longer term this would be a great solution. Meantime I found this...

Thanks that’s great, the problem is how do I get the input of whatever device I use onto my mobile so I can monitor the status?

Hi chaps Is there such a thing as a wifi input status monitor? I'd like a device that will connect to my wifi network and allow me to see the status of various inputs so I can remotley monitor if my garage door is accidentally left open for example via a mobile app. There are inexpensive wifi...

I have copied the OP into the Combustion Chamber forum now, sorry for any misunderstanding.

Im really sorry and I totally agree with you, I accidentally posted in the wrong forum. (Small phone, crap eyesight). When I get home and on a pc I’ll delete the post and copy it to combustion chamber. Thanks for pointing out the mistake!!

I am gas safe registered, I just haven’t ever fitted a boiler with a vertical flue. I imagine you were lucky enough to have fitted one before you fitted one for the first time. Thanks for the help though.

Hi chaps I’m taking out a Worcester Greenstar tomorrow amd replacing it with an Ideal. The existing flue is vertical and runs through the attic of the bungalow and terminates near the ridge on a pitched roof. The new flue will follow the same route. I’ve never fitted a vertical flue before...

The pump is definitley orientated correctly but I havent checked if there is hot water coming out of the drai. The manifold is cold but I suppose it would be of water isn't moving. I'll try draining some off when I go back. Thanks for the help!

I have attached a picture. The pipe from the motorised zone valve is hot but none of the other pipes coming from the mixer valve are hot.

The valves are definitely open, they do have actuators one top of each valve and they do open and close dependent on the zone thermostat. The pump is also running. I have checked that the manifold isolation valves are open as well. The water is hot as far as the mixer valve and I can’t...

Hi chaps, I'm looking for a little help with an UFCH system. The customer complaint is that none of the heating zones appear to be working, I have been to look at the system, all zone valves are open and the boiler is firing. There is hot water as far as the mixing valve but it doesnt seem to...

I fortunately not, I did suggest that they do just that. I prefer bar showers but they have no plans to remodel the bathroom for a while and they have no spare tiles. somebody should make a nice chrome plate predrilled for a bar shower and big enough to cover the hole left by a concealed valve!!

I have been asked to replace a faulty shown in picture concealed shower valve but there is no makers info on it that I can find. Are most makes interchangeable in terms of pipe centres etc? thanks In advance

I have actually done that, it’s a geberit valve. I’ve ordered one already and it’s supposed to be compatible with the existing cradle but I do t think it will be. These are pictures that of the broken valve. It has two hooks on the bottoms which engage on the outer rim of the cradle but the new...

Thanks for the reply but I was hoping I’d overlooked something simple. I only need to change the flush valve and didn’t want to remove the pan really