Search results

Thanks for your replies It's probably about a pint of water in all, so not too much. I don't see it as a big problem if it isn't going to effect the boiler, unless someone is standing under the flue at the time! I suppose over time a stain will apprear on the concrete path below from...

Hello We've recently had a new condensing boiler installed in our airing cupboard. The flue pipe goes up into the loft, bends through 90 degrees, and then runs about 15 feet to the exhaust vent in the gable wall. When the boiler first starts up, some water is ejected from the flue vent for...

Hello I recently moved into a house which has been fitted with a Halstead Ace Gas Combi Boiler, which is a Wickes product I believe. The boiler has developed a fault, where water is slowly dripping from the outside overflow, and so the pressure gradually drops until the boiler will not...

Hello, I live in a house built around 40 years ago and one of the original mortis latches on an internal door needs replacing. The original is about 3" in depth and so I bought the modern equivalent of 75/80mm. At first the new latch appears identical, however it is not quite the same...

I think this thread is a bit of a wind up by the OP. It's kind of obvious that the mains should always be turned whenever possible, that's in 99.9% of situations. If this is a genuine thread, then my advice to the OP is to always wear really thick rubber boots...

My friend has a Dimplex CLX24N storage heater. An electrician dismantled and examined the heater, and said 2 out of the 4 elements were broken and needed replacing. He quoted £40 per element plus labour. Therefore I bought 2 new elements and decided to fit them myself. When I opened the...

Hello My friend has a Dimplex CXL 22N storage heater and has been told 2 of the elements are broken. I'd like to replace the elements myself, and having read the service manual, the job looks quite straightforward. However I don't know which 2 out of the 4 elements are broken, so how...

Hello My friend has a Dimplex CXL 22N storage heater and has been told 2 of the elements are broken. I'd like to replace the elements myself, and having read the service manual, the job looks quite straightforward. However I don't know which 2 out of the 4 elements are broken, so how do...

Hello We have an old Baxi Bermuda back boiler and fire front from the 1980's which we're hoping to replace next year. In the meantime the firefront has developed a problem, which might be easy to fix, so just wondered if anyone could help, and if we can repair it ourselves? The...

My Mum is having her ageing central heating replaced and qualifies for a Warmfront grant. However she is less than confident or impressed with Warmfront, as a result of her own experiences in dealing with them, and also from reading lots of negative publicity. Not least their attempts to...

Hello, We currently have a Baxi Bermuda back boiler, with cold/hot water tanks, which is 25 years old. We'd like to replace this soon with a Combi system and are about to start asking for quotes. We also need all new radiators, since some of the existing ones are leaking. Will we...

Hello, I'm a fan of the new energy saver bulbs, but find that they are never quite as bright as they claim, when compared with regular bulb wattage equivalents. For example I have a large hallway with one 150w conventional bulb. If I swap it for an equivalent energy saver bulb, it doesn't...

I'll soon be ready to paint/treat my newly built decking. Having read lots of other posts it's seems that this is the point where you can make a big long-lasting mistake by choosing the wrong treatment! I've been put off the idea of stain because that eventually flakes off, so am now thinking...

I'd like to lay a decking frame directly onto the ground, since it doesn't need to be elevated. The area of ground has good drainage and has been dug out to several inches and filled with a weed membrane and shingle. Could I lay the deck frame directly on top of the shingle, or should I...

Please excuse my rather simple question, it's my first time laying decking... How far apart should you position the two screws when fixing the deck boards, how far from the edges, and do you screw into the channels or ridges on the boards? Many Thanks :D

Yes they are planning to change all the radiators, piping, boiler and thermo. There are 5 radiators in a 3 bed semi. The quote is for £530 extra to the £2700 grant, plus another £250 for the additional radiator which we will cancel! If they are buying the Ideal boiler at low cost I expect...

...one last question :D We also asked Warmfront to install an extra radiator not covered by the grant. This was just a small radiator in the airing cupboard situated right next to the boiler. They quoted £250 for this extra work... isn't this a bit steep... what should we reasonably be...

Thank you for all your feedback, I'll phone the installer and/or warmfront tomorrow to see if they can supply a different make of boiler, perhaps Worcester or Vaillant with a minimum of 30kW. My Mum just wishes she could keep her Baxi Bermuda back boiler! which has given 25+ years excellent...

Just had another thought, is the make of boiler supplied specific to the Warmfront installer? In other words, if the installer will only supply Ideal Isar, can we ask to be referred to a different Warmfront installer who will provide a different more reliable make, perhaps Worcester or...

My Mum who is a pensioner is planning to have her central heating replaced by Warmfront, but before proceeding has asked me to search the internet for some reviews on the boiler they use... Warmfront say they install the Ideal Isar 24HE, and so I was shocked to read another thread on this...