Search results

Bellbox as in nova active ? Are they jumpers on top ? There are a couple of versions on the bellbox

Wire via 4 core to network ….either to panel or nearest other network device …eg keypad ( if wired )

GJD lighting system not cheap but last years connect what ever type of light you want fitted it at last house and moved it to this house over 20 years old still working and sensors been available since they came out in the eighties

You have put the link wire in engineer hold off …not the other ….T….move the yellow wire up one in the bell box …

Case tamper ? …..it should say bell tamper

It is plugged in ?

You could use a mk master seal 20amp double pole switch fitted next to your double socket outside ….

Have you put a wire link from 0v to one of the T terminals ?

No just plug it on to a com port …make sure you have set a UDL code …default 1234 , but you have to put it in the panel , you might have to download the usb drivers

As above it may have been junction boxed in series under the floor …twist together at both pirs ( blue and yellow ) then check at the panel end …

Time is money if you can get a cable to the alarm box or the keypad ( this has 2 zones) then that’s ok , second. option look for a cheap we32 wireless expander on eBay and detector …this also give the option to add further devices ( 32 )

Check at these pairs

Check voltages at psu ….as it is multi output ….better to first check with items disconnected as one of these may be shutting down the psu ..

Ok if it’s linked via the kitchen there should be TWO cables in the kitchen detector , make sure ( if there is ) that the blue and yellow are connected through….post picture of kitchen wiring as you have on the hallway ..

Does it back onto another pir ? You would have to take out one of the + reds at the panel to see which one it is on ….or read what’s on the labels

Is there a spare cable in the panel with only the power connected leaving the other wires unconnected ?

The TP LINK WIFI extender is good …plug in socket with a ETHERNET plug ..about £14 in Argos , you would still need to power locally

Has the used V10 pcb ever been connected to the cloud ? Is it locked to another account ?

Top two across from microswitch any way around

Panic will work 24/7