Search results

Hi How long would it take to change a faulty heating element in a Cylinder? Thank for any help in advance A

Hi thanks for the replies the radiator is what’s commonly known as a designer radiator and is probably less than 10mm off the wall and you can see through the slats to the wall behind. But one of these suggestions will probably work cheers

Hi I need to drain a CH system to paint behind a radiator but there are no drain points on the lower system. What is the best way to do this to avoid a flood? I can reduce the pressure from the boiler drain. Regards

Really? That surprises me.

Hi I am just wondering what the m2 price difference is for a loft conversion against an extension on new foundations. If the extension is £2k a square meter what would the equivalent loft be? both to a plastered finish. Thanks in advance

Hi all how much should a 3 ply felt roof cost per m2 ? I have a 4 x 6 flat roof extension to cover Any help appreciated Regards Sid

Hi Does any one know how much (roughly) it costs do divert the over head power lines. At the moment mine go to the back of my garage and I want it to come into the front so a shortening of 7m Thanks in advance

There’s 2 sand mixes available sharp to soft mix 70 % sharp to 30 % soft or 50-50

What sand are bricklayers generally using to Kay bricks? 70-30 or 50-50 ? Cheers in advance

I just want to pick up the toilet waste and consolidate the rest and get it out of the way of a potential extension but leave the vent part of it where is. It may look a bit odd but you won’t see it

Hi I am just wondering if changing the location of the svp as per the photo is acceptable? I don’t want to mess with the roof if I don’t have to Thanks

It’s a flat roof btw

I’m looking to build a 6x3 single story extension and trying to work out how much insulation I need for roof and floor. Obviously it’s 18m2 but how much insulation would you buy to cover this with cuts waste etc? Thanks for any help

Hi What’s the best way to cut through a stone lintel over a fire place? I have one that goes the full width and I only want to cut out the bit over the opening not the bearing Thanks in advance

Hi thanks for the reply but unfortunately it’s not a catnic, IG or keystone as far as I can tell

Hi Does anyone know the make of this lintel? It is a box lintel 100mm wide and solid i.e. no perforation holes Thanks in advance

Hi I have a leak on an lpg boiler of the element circled in the pic. What’s this item called and can I change this myself legally. ? Thanks in advance.

Hi I have pipework that runs low along behind the toilet and sink. Is it best to box this in before floor and wall tiling or after ? The boxing will not be tiled Cheers A

Hi I need to put a 15mm T connection on my hot water system but there is no play in the pipes to move them apart is there any tricks to get a good connection on this ? Regards Andy

Hi Does anybody recognise what this yellow sheeting is? Is it related to piling? thanks in advise amwc