Search results

Hi, thanks for both replies. The screen doesn't reach the ceiling, it's short of it by about a good 30cm or so. the fan isn't within the screen, it's a little outside it, more in the middle of the room. The room dimensions are about 2.5m x 2.5m I did see under our tray once when it was being...

Hi, the house I live in is only 5 years old, but I have a few problems in the main top shower. The shower tray has a crack in it, I am a big guy, so I know that is the reason for that. This led to some water going under the tiles and made the carpet just by the door a little wet, this has since...

Hi, we have 2 toilets in our house that are a bit leaky, the one shown in the pic below is by far the worst. We hear it refilling itself regularly and can see the water going down the back of the toilet. The other toilet isn't as bad, but does do it sometimes. These toilets are 5 years old and...

Its part of the light and doesn't move.

Hi, I bought myself 2 solar powered lights for the side of the house, both pretty bright and seem decent, tested both prior to putting on the wall and both worked fine. Link to the ones i bought below: Link The one that's in the back part of the garden comes on very bright when it gets...

Hi sorry, it runs off the boiler and there is a valve to change the temperature.

Hi, this is prob a stupid question. I was wondering on my potterton promax ultra boiler, there options to change the temp off the radiators and water separate. If I change the water, does it only do this for taps only or does it also effect the shower? I know you can change the temp obviously...

Hi, I have bought a keter store it out arc shed today, while putting it together i have clicked the top door hinges into the side walls at the top and only realised after it says to put them on the door first, which is obvious because now i cant put the doors on as there isn't enough room so...

I was looking for some compatible cartridges and some sites list 28 spline and some have the cartridge and shows as 20 spline. Would both work fine as both are listed as being compatible? Regards James

just checked after your message, nothing in spam or deleted, as i posted the message the option for email notification was ticked as well. Does it not work with hotmail accounts?

I have never received any email notifications on this site and was wondering how i set it? On the alert settings page all are ticked. Regards James

Thanks Terry, been keeping an eye on it, its reheated a couple of times now and the bar seems to be pretty set at about 2.4-2.5 now. There is a guy replacing a radiator of out next week and he was a little worried about doing it as i mentioned this to him, he then said he was happy to continue...

I am actually testing this right now, at rest it was set to exactly 1.0 bar and I have not long put the heat on (about 10 mins) and the bar is now 2.7 temp is showing as 79c the error is not showing at the moment though

It re occurs only if the pressure is set to around 1.5, if set to 1 it doesn't go that high to give the message

I was going to get a 1400 initially but was no stock, guy fitting my new rad said there wouldn't be much difference in heat output with the 1200 so gone with his recommendation, do you think that's probably right? Good bit cheaper as well. James

Hi, not sure if i have an issue with pressure on my potterton promax ultra 40 boiler. we have recently started using the heating again and i noticed only when the heating was on the boiler kept flashing green alternating between 117 which is high pressure and then giving a pressure reading of...

Well i have had a guy out to have a look, he recommended either the kudox premium 600 x 1400 or the 600 x 1200 We originally set on the 1400 because it might have a little more output but he did say it wont be a huge amount more. He then went to get the stuff from screwfix and theres no 1400's...

Hi, I hadn't but i have just found a site that has a heat loss calculator and the result gave methe following based on my answers. Heat loss in watts 2825 Heat loss in BTU's 9641

Ah would i need to get a plumber to have a look first prior to getting it done?

Do you think when getting a new one it would be a good idea to aim for it being a little over the height of the sofa?