Search results

Hi we do not use the rain shower at all. Just the normal head shower. But even when it’s twisted super tight to turn off - it still drops …. Sometimes hose sometimes small shower head ..

Sorry can you please explain this differently I don’t follow? Let’s say I have valve 1: which I added and lets me switch between rain shower head and normal head And valve 2: which was already there and turns the whole system on / off and let’s you choose hot / cold What is it you’d like me...

Hi when I moved in There was only a rain shower top bit- I bought this divertor from eBay to enable me to have a normal small head shower (see yellow)...

sorry what I meant was if I remove that trim I can possibly join a piece of flooring to that board - and cover the brown area Then place the trim where the new end of the flooring meets the tile?

I’m thinking tiles could be cheaper than splashbsck ..

How would I take off? Chisel and hammer?

Yea it’s a 70s house - can i floor over it though? Take the silver trim off and try join a flooring piece to it …? And then a trim to that to meet the tile

The lost head nail seems my best bet! These seem long though 4cm?? Also the head doesn’t look like it’ll get “lost”?? https://www.ebay.co.uk/itm/265908371823?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=s56aXJrSRju&sssrc=2349624&ssuid=Jc5mdXJNTW2&var=&widget_ver=artemis&media=COPY

Hi the little strip of wood that stops the door came off so i used some panel pins but they look horrible and the head of nail shows badly. Is it normally glued in? Or nailed in with a particular type of nail whereby you can’t see the head? I need to poke the nails out and start again the...

Hi for whatever reason the old home owner didn’t tile to the flooring - or floor to the tile! However u wanna look at it So I’m left with this annoying brown piece I. The middle! What can I do that’s easiest and will look half decent pls? I do have a spare few grey flooring boards she left...

Hi all We moved into a house with a splash back that’s 1. Part Cracked and 2. Not a colour we like New splashback been quoted £600. Plus someone else to rip off the old and plaster up any damage from taking it off. I would like to please have suggestions on cost effective measures I could...

I got the message :) When testing I did on B (downstairs only). I needed to do on A (whole house) My settings must be so that only get a text for A….

I will try again tomorrow to let it ring out. I can’t understand why it would send a tamper message but not the senses movement one?!?

Ok so I calculated that it’s actually day 180 today :( So I shut down the alarm mcb (even though the alarm remained powered on - must have built in back up battery?) Anyway - as I opened the alarm panel I get a text message?!? “-D Alarm - Case Tamper “ So I’m guessing the number is still...

I could do but Last time I let 180 days lapse - an error message came up on the panel….not such error this time Also I rang Vodafone who told Me sim is live. I was also able to check the credit on the account by dialling from another Vodafone sim ….. So it’s all very strange considering I...

Ok so I went into menu and replaced the Batteries of all sensors I set the alarm and let it ring out (so that I get a text message) cos I’m approaching the 180 days Vodafone give before a sim expires Unfortunately although the siren outside rang and panel inside rang - no text was received...

But when I go into engineering do I select any particular option or just enter my engineer code so I’m In menu ..

Unfortunately it says something else now….see attached please Before I’m not sure what it said…but it’s certainly yeh right code cos you can press yes to “exit engineer menu” after u keep pressing no…. Not sure what to do now - any help appreciated please!

Hi I punched in engineers code - didn’t go on any particular setting - just left on engineer menu. And when I opened the sensor with screwdriver - the alarm started beeping off! Was I meant to select a particular option before opening ??

Pls see attached the sensor I think they are CR123A I will enter engineer code tonight and open sensors to check And yes replace all same time - good point!! Will any batteries do or do people recommend a particular brand - or maybe rechargeable ones ? I was thinking of these CR123A 3V...