Search results

  1. A

    Tap Reviver

    Cheers people :wink:
  2. A

    Tap Reviver

    Has anyone come across a tap reviver with a depth of over 32mm? http://www.bristan.com/WebRoot/BristanDB/Shops/Bristan/Products/WEB_DATA-1063225-D1.PDF I have come across some taps that are at least forty years old with a seat depth of 40mm. The head has snapped off and taps are very...
  3. A

    Using flue outlet for prv discharge?

    Correct. And unfortunately it is on third floor so impossible to see where it terminates!
  4. A

    Using flue outlet for prv discharge?

    No its the prv outlet the boiler is on top floor the flue is straight through the pitch roof.
  5. A

    Using flue outlet for prv discharge?

    Boiler is a Ferroli Modena 80e with the prv outlet rising. I read a post similar to this from a few years back http://www.diynot.com/forums/viewtopic.php?t=101266&postdays=0&postorder=asc&start=15 Has this type of practice been accepted yet or is it still a grey area subject to...
  6. A

    Cover of the thermostatic valve on a radiator

    Post a picture, if you can, someone bound to recognise the make. If you can get the make, model etc and no spare head available you could still buy the whole valve and simply change the head.
  7. A

    tricity bendix tbdw41

    Can any one help with a bit of advice re dishwasher? Dish washer is approx ten years old and had a new pump motor couple of years ago. It has now developed a fault whereby it stops mid cycle. Turning dial to next setting starts it again but soon stops in between cycles. Not sure it's...
  8. Biasi Pump

    Biasi Pump

  9. Biasi pump

    Biasi pump

  10. Ferroli Sigma Heating Boiler

    Ferroli Sigma Heating Boiler

  11. diynot

    diynot

    pictures
  12. A

    Heater matrix

    Sounds like a plan.. Cheers.
  13. A

    Heater matrix

    I have a 5 year old Peugeot Partner van. Heater matrix is leaking, any one ever changed one of these as a diy project? I understand dashboard has to be removed? The parts are cheap at around £40 but labour from local garage is over £200
  14. A

    Peugeot Partner

    [/URL][/img] Need advise on how to remove a broken gear link rod on my Peugeot van.
  15. A

    Zanussi Aquacycle 1400 problem

    My washer is faulty, symptoms are: Runs through cycle and stops without spinning, short repeated beep. Will drain okay tried put all wet clothes on spin only but drum does not spin round. No abnormal noises just wont spin. Any ideas anyone ?
  16. A

    Alarm fault commercial premises. advise required

    That has been identified as the fault and the alarm company assure me it cannot happen again. I still am baffled as to why such an event could so easily occur. I would have thought that an industry standard (especially in commercial properties) would prevent alarm companies installing or...
  17. A

    Alarm fault commercial premises. advise required

    We are on a monitored system at work (not redcare). Scantronic system installed by professional company 5 years ago. We got burgled recently and it was made worse because the alarm company did not respond to the alarm. They tell us that when the bell box was ripped from the wall the gsm...
  18. A

    10mm shower cable question

    I fit gas fires, for my sins..... And I find that the hardest part of my job is getting reliable tradesmen to work in my customers houses. If this guy turns up tomorrow ! it will be the third sparky I have booked in. So, when the sparky turns up tomorrow he will find the floorboards up...
  19. A

    10mm shower cable question

    Sorted Thanks sparkyspike
  20. A

    10mm shower cable question

    Picking cable up for shower tomorrow am. Part P sparky calling to carry out electrics £20 difference in "heat resistant" cable and "normal" . Is it worth the extra for a 9.5kw shower installation to buy heat resistant ?
Back
Top