Search results

Here's the problem I'm still having. Occasionally I will go to set/unset the alarm and the whole thing will freeze with all lights on and the only way to re-activate it is to pull the fuse on the cu. I'm beginning to think its the bellbox somehow losing comms with the control panel. I don't...

Hi Anyankha I have the same alarm and sounds like the same problem. I did buy a new battery and the problem is still there. When you say 'the alarm could not be silenced' do you mean the outside bellbox? Here's the problem I'm still having. Occasionally I will go to set/unset the alarm...

No, Still me Securespark. The area covered by the radial circuit is nowhere near 50m² and I'm not sure what you mean by EFL but the only equipment being used are all kitchen appliances, washer/dryer/kettle etc. Cheers :roll:

Thanks for that. Converting to a ring is not an option because of the tiling etc, I will therefore reduce the fuse to 20A Cheers :lol:

The wiring is 2.5mm T&E not insulated in anything, not grouped with anything else and on a 30a fuse. So should I downsize the fuse/MCB to 20 amps or will it be ok as it is. :?: Cheers

Thanks for confirming my suspicions. On the same topic equitum. It would appear that the circuit that has been installed is a radial extending 6 double sockets and not a continuous circuit. Are there any implications likely rise from this set up.

Hi Can anyone please advise as to the possible cause of a badly burnt neutral terminal on a double pole double socket. The socket has been working fine for the past 5 years but when I took it off to do some grout restoration I noticed the terminal has melted. Could it be due to arching (not...

I will check tonight, but its pretty hard to see anything with all the wires. Cheers

I replaced the back up battery about a month ago. I will check for loose connections from the mains, but I would expect the back up to kick in if it detected a loose connection thus keeping all info. Maybe it is just knackered....! :roll:

Hi Can anyone tell me if an alarm system can be affected by static? I have an Omnicron 7000 and within the last 6 months it has been going off and losing all programming whenever you are about to activate or de-activate it. It doesn't happen all the time but becoming more regular. Any...

Cheers for that, any suggestions on a decent quality panel? :?:

Hi Can anyone tell me if it is ok to install a new alarm panal and use the existing PIRs and contacts along with the the existing wiring. Cheers:roll:

Thanks Chris Replace the whole circuit board makes sense, I'll try the worcester website for the part. Cheers

Hi Are we talking microchips for timers, stats etc or are they easily identifiable. This problem occurred previously but corrected itself after about 4 months, would this suggest a loose connection. When I say fan I mean the bit that extracts all the fumes out of the flue. Cheers

Tell me where to get the heat source and where to test and I will. I am competent and capable you know.............! :lol:

Thanks for the response..... Is there anything obvious that would tell me what is wrong, what would a stat look like for instance and is there anyway of testing it, or would it be a case of replace it and see. Cheers :?

Hi Could someone please tell me how to correct a problem with the fan on my Worcester 24i combi. The fan comes on when the boiler is activated (normal) and after a certain period would switch off again (normal) Now though, it will not switch off, I have to switch the power supply off the kill...

Thanks guys bought new battery and installed it. Cheers :D The next question I have (due to the fact I think the control panel is too old and worn). Can I change the control panel and run all the existing wiring into a new control panel or would there be any issues? Cheers :roll:

Hi Can anyone please tell me where I can purchase a new back up battery for an Omnicron 7000 alarm control box. Thanks :roll:

Cheers for that :lol: