Search results

Hi , I have a 4 foot fence with concrete posts in between each fence panel. I need to increase the height to at least 6 foot and I'm happy to purchase new panels , but really don't want to fit new posts. A quick Google shows the below, and they are designed for concrete posts , but worry the...

Morning all. I am in the prcoess of purchasing a property that fronts a 20mph reidential road. Currently there isnt a driveway but a very obvious solution to remove the garden wall to allow me to park on (what is currently) my garden. I'e tried calling my local planning which just rings out...

Hi guys , As the title suggests my 4 yr old Samsung fridge trips the RCD. Currys 'know how' came out to it and left saying it wasn't fixable. His diagnosis was that there was a fault on the wiring to the defrost heater or compressor which was short circuiting to earth. My daughter who was here...

Long post warning ! Hi folks, I took on a project in the full knowledge that the vehicle didn't run properly , so only have myself to blame! Vehicle - Fiat Panda 1.3 multijet diesel 2010, 100k mileage, full service history. Issue - vehicle struggles to start and when it does it cuts out...

Hi, I've got a waste solvent waste pipe that I need to connect to 40mm or 32mm compression fittings and pipe. I'm not sure of the outer diameter, i think its around 34mm. At one end of the pipe run it connects to a connector on the toilet waste with 'S8M' stamped on it, which a bit of googling...

Hey folks, I've got a 2.5 dci Master and it needs a cambelt. I've found one poor video in Portuguese on YouTube which isn't a great deal of help. I've read a few posts from people who have said you must use a locking tool. Is there any reason why I can't mark cam/crank cogs with tippex like...

Couldn't for the life of me work out the best place for this post , so here goes. For reasons I won't bore you with I can't put a bathroom extractor fan in my bathroom wall. So I have two choices. 1. Extractor in ceiling above shower and run approx 4.5 metres of corrugated extraction pipe...