Search results

I take it you mean the 4th as in the one next to the window? If I set my circular saw to 18mm depth that should be fine and not hit any pipes hopefully lol Cheers

Hi there , I fitted an extractor hood when I dine the kitchen and I used it in recirculating mode ,because of where the hood is situated. As you can see from the picture the extractor is turning the wall and ceiling black . Anyway I would like to duct the extractor to the outside,but the...

hi there, I am in the process of sorting out my mums shower cubical and replacing the tiles for a showerwall paneling system ,anyway i done some research yesterday about shower trays just incase i had to remove the tray ,but i found that the waste trap should be easy to access ,but because my...

cool the person that tiled the cubical made a crap job of it so i imagine it wont take much to get them off,but do you think it would be ok to use a sds drill with a chisel on it to remove the tiles or should i just use a bolster chisel. Thanks again

hi there, I am looking at using showerwall paneling http://www.showerwall.co.uk/index.asp now this is going on a plasterboard walls in a shower cubical that already has tiles on it and i am wondering if i should take the tiles off, this is because i know there has been some water getting...

cool thanks for that i might have some tap washer some where. Just bloody gone a snap the single bolt thats made out of cheao copper need to extract that, also want to get some copper tails to help stop the tap working loose,do you know anywhere that sells them? Cheers for all the help :D

i cant remember who it was made by i shall have to find out but here is a pic of what inside Cheers

hi there, I have the as title tap fitted and it drips on the filter tap unless you can turn it a little bit more which my wife has trouble with so i was wondering if there is anything i can do to improve it. i have took the knob off and underneath it there is a one piece nut and washer so do i...

ok thanks for your help

anybody

hi there, I am redoing my kitchen and have taken the tiles off of the window cill and wish to replace them with window board. The problem i am having is that because they were tiled before the plaster on the cill sits high than it would if it had a window board on it so should i take all the...

oh yes i think i have seen one of them but i have the flexi hoses and not copper so i dont think that would help out doh.I do have the rubber washer there to all though it didnt look all that good.

cheers whats this stand off bracket you are on about

hi there, I have fitted a monobloc tap with single thread rod and nut it has a horse shoe washer as well. The problem i am having is that the tap keeps on working loose i have done it up tight a few time now but it keeps on working it was loose,the swivel of the tap is quite stiff which i dint...

hi there i am revamping my kitchen on a budget at the mo and i was wondering i have just took the laminate off of on draw to see what the wood was like underneath and it was ok but mdf so i was wondering if i painted the mdf with mdf paint would it look good?they do have a routed out mould...

that is damp from where i removed the tile adhesive and it wetted it so not a problem but thanks for pointing it out cheers.

it will be a recirculation chimley hood. out of interested how much would i be looking at to get a sparky to install and cert the fcu and the hood? cheers

cool i was thinking of taking the spur from the left socket to an fcu below the cupboard and then fit a socket above the cupboard to connect the hood to or should i just connect straight to the fcu?

hi there, I have just stripped the tiles off of the walls in my kitchen and have found that a pipe to the boiler has just been left and not plastered over so i was wondering what the steps would be to plaster it properly please have a look at the pic and advise,all help appreciated cheers

hi there i am at the mo refurbishing my kitchen and would like to fit a cooker hood (which will be checked out by an electritian) after taking a look at the sockets where i was thinking of taken a fused spur from seems to be a small ring circuit correct me if i am wrong,as you can see from the...