Search results

does anyone know where I can buy window boards to fit over existing external sills, upvc windows are ok, but the old sills are not! thanks jeanette

its a worcester 24si 11, the light is above the hot water dial, apparently its a fault indicatot, it flashes a number of times per second to indicate fault. the radiators were hot again couple hours ago, but then went cool again, the light stops sometimes then starts again.

worcester combi boiler, radiators are lukewarm, hot taps barely tepid, warning light flashing rapidly. I had an engineer out he bled radiators and topped up the pressure, 2hrs after he left it was lukewarm again, light flashing. The pressure is sitting at 2, neither rising nor dropping...

ground floor bathroom, the hot isnt coming through whether the cold is off or on, hot water in the sink/kitchen/wall shower all fine.

Hi The hot water tap is not letting any water through, the cold tap is fine. It happened suddenly, was fine in the morning can anyone give me an idea of what is wrong please? thanks jeanette

thanks for the fast response. I thought if I left the laminate down, it would save putting down something else to level the floor as I have floorboards underneath?

Hi I have glued laminate in the kitchen, I would like to lay vinyl on top is this possible, I looking for a quick easy fix!

hi all done and dusted (literally), took a bit of bashing, just attach the surround now, thanks everyone! Jeanette

Hi I dont mind hitting the wall with the hammer as long as the wall doesnt come down! Theres def nothing that low down supporting the wall? I was reading other posts and they mention supporting beams, def not in this wall? [/b]

Hi I took off paper and the vent, chipped away plaster, there is an opening behind the vent oblong, no dead pidgeons thank god, but heaps of soot and rubble. Im finding it hard to break through, i assumed it would be bricks, but seems to be concrete, im using a hammer and chisel, but barely...

thanks !

hi stuart, dont know if these photos help much? [/img]

Hi I have what looks like a a wall that was chimney for a fire, have a hearth shape on floor in front of it, its been closed up and has an air- vent in it, i would like to open enough to fit a cast iron fire surround fluch to wall, and an electric inset. The wall runs all the way through my...

hi can anyone help please I want to fit a new ceiling light to where an existing rose fitting is, the rose appears to have L,N,E plus a double black wire going into the connector block. I dont know what the black wire is for, and does it have to connect to the new fitting, if so where? thanks...

hi i changed the isolating valve for a new one, really quickly! The pressure is stable at 1 bar, and the valve seems fine, leaked a tiny bit first, but i tightened it a bit, and seems ok now. There was a wee bit of dampness would that just be what was inside the nut, fingers crossed!

ther is a small copper pipe i presume is the overflow, but nothing that looks like a tap?

im going to buy the stop end/lockshield valves today. prob the stop end. i looked outside for the prv/tap but cant see one?

I dont know anything about plumbing, while not wanting to rush this, i have lots more to do! Plus im not sure on draining the system, so i could cut the pipe, and screw on the new valve really quickly without flooding? ps is a lockshield valve and a stop end the same thing.