Search results

hi:) i've installed a premier elite 24, x2 RKP, Wireless expander, Smartcom & up to now 14 sensors (bell boxes still to install), i have it all up and running and am now looking at arming/part arming & areas. i basically want 2 different states: 1. fully armed for when we leave the house 2...

looking to install a few more componenets this weekend. just to confirm i'm understanding this right from the advice above, if i wire as below this'll achieve 2 separate zones from a single 6 core wire edit: just to confirm the orange wire on the keypad rear is just a link wire, no resistor...

this kind of thing? http://www.cctvcentral.co.uk/texecom-ricochet-premier-elite-micro-contact-w---white-gha-0001-2395-p.asp?gclid=Cj0KCQjwuMrXBRC_ARIsALWZrIhnz4X8oSgIH01-UivYqVmzDq5sgYl_Q4XlPjwNGzn20pfHG7b0CroaAjBeEALw_wcB they do look a lot nicer, i'd need a separate contact and shock with...

hi:) pretty much have all my wired stuff working now and can connect/setup via wintex/connect etc. i'm using all 8 wired panel zones, and will be using x4 zones from the 2 RKP's. i also have a 8xp w expander installed to eventually use with the smartkeys i've bought, so i thought i'd use some...

edit: now sorted, incase any other noobs are having the same issue, i had to ensure all the details including the UDL password were up to date in wintex, then an extra "smartcom" option became available in connect. selected that, then had to generate a code via my phone. on android (as the...

i've had another read of the smartcom and it doesn't really mention wintex apart from saying its a requirement in the bumf, but then never actually mention again in the instructions. also read the wintex instructions and apart from mentioning COM IP i can't see anywhere else that is close...

Face-palm, should of known there'd be a simpler way! Tbh I did think that was possible, but talked myself out of it after downloading and having a play with winter. All I could see on there was access via com etc which I assumed was by a lead Will have to have another read, I didn't see...

Hi:) i now have my wired system up and running so i've moved on to connecting via the smartcom CEL-0001 i purchased from alert electrical. i have the smartcom setup and can connect and arm/disarm and view status etc one of assumptions from looking at the smartcom when i bought it was that due...

brilliant thats the ticket, many thanks

hi:) i've just put power on with most wired components installed, i'm folllowing the installation guide which says to mute the alarm using the default code, then select yes to confirm devices. then enter the default engineers code and select 1 or use the up/down key to select zone setup. when...

Great info thanks. I'll take a look when it turns up

Just realised, can I achieve separate zones with a single 6 core cable?

OK great, thanks

hi:) continuing on with my texcom permier elite 24 install i'm considering using a wired texecom imapq plus with door contact on my front door. the rkp is quite close so i'd be using the zone/zones on that, is it best/least hassle to wire both the reed and shock sensor into 1 zone, or wire...

Ok thanks, tools won't be a problem. Edit. Actually after having another look at the door think I'm going to go for something more like the first one. I'll install 1 at the top edge of the door, probably wouldnt stop the bottom corners of the door being bent up, but to install something in...

many thanks for the reply:) so something like these below? https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/door-contacts-switches-c-36_44/knight-g3-double-reed-aluminium-angle-contact-yh10a-p-4542.html...

also can you recommend any type of sensor for up n over garage door? there is a fair bit of movement/deflection in the bottom of the door, so when its windy i'd imagine it'll move, are there any sensors designed/suited for this kind of application? hoping to install one on either side at the...

Great many thanks for the info and advice. I'll install more conduit then and rerun the t&e through there, I'll also still in some grommets:)

hi:) i'm renovating my 80's dormer and installing the hardware below, i've ran all the cabling and installed the pirs (in all completed rooms), keypads, control panel, smartcom and wireless expander.. The bellbox wires are in place awaiting me renovating the last upstairs room (need access to...

ok cool, i'll probably go with the bosch ones then as i like the look of the blue led and bosch is a brand i trust, can the blue leds be set to flash or stay permanently on when armed? so if someone looks in through the window they'll see the pir etc? also will get the 6 core wire. still not...