Search results

Electric water heater, solar panels are already onto of my existing carport so would go back on the new structure and could potntially power the salon, 2 cutting chairs with 2 parking spaces on a driveway. Aircon would heat and cool the salon

Hi I think I am going to put a planning application in, do I need to state in the application about water, drainage etc? parking will be on my property so that shouldn't be an issue opening hours would be 9-5. does planning being granted fall down to what my neighbours concerns are or n...

It is not joint to the house it will be under the existing carport at the end of the garden, my thoughts is I don't need planning but I just want some confirmation in the matter, I have no issue getting planning it was just inconvenient waiting 8-10weeks for it to go through. Thank you people...

Hi will try and put as much info as possible on here. I want to build a hair salon in my garden it will be a of 8.6m wide x 3.3m wide I know there may be height restrictions not sure what they are but this should effect anything. I will attach a rough sketch to help, there is an existing...

Hi not yet purchased property just wanting some information. I will upload some photos. Small conservatory extension on back I am wanting to building on storey on top of this foundations are 1m deep so shouldn’t be an issue with that. I’m sure planning is needed for this. Second extension...

9Hi I am renovating a old bungalow, the meter is located on the inside of the property, who would I call to enquire about getting it moved on the outside of the property, I know building regs are that on new build they are to be located on the outside of a property, the incoming gas pipe would...

Gloucester

Tilemaster super flow 30, 20kg bags with liquid to go with it 35 bags available going very cheap!

Hi I have chipboard floor and am wanting to lay engineered T&G herringbone flooring I have a very good flexible glue to stick the floor down with. The house is timber floor downstairs do I need to prime or DPM the chipboard before laying and glueing the floor down?

https://ibb.co/X3SRPh5 https://ibb.co/CJ6xkcz https://ibb.co/j8Nn3Jm Hi I have purchased this bungalow, I am wanting to put a 2m extension full length of the house on the side and the roof will tie in similar to one of the photo showing it. The side of the house will come out to tie into the...

I have just had an offer accepted on a bungalow. I am planning to flip the property just wanted to see other project builds for ideas. I will be posting my own thread to the build on here expected to get keys by the end of the month.

Could someone give me advice on planning my garden I don’t want to spend over 2k as little as possible to be honest but would like it to look nice. It is small around 18m long by 8 wide it slopes of and is really out of level. I will attach photos the tree at the back can partially go their is...

Thanks for the reply, as for drawing it out what’s the best way to set this out I was thinking of drawing circles some how to create parallel sides.

I am wanting to make three sides to form a some what box to place a sand tray inside. Measurements are going to be 1010mm length x 610mm in height. I am wanting to get this accurate but am unsure on how to make a template to router it or to jigsaw it after setting it out. Any help is...

I am wanting to build something very similar to this out of 18mm ply I am wanting to know how to find the angles to cut the ply for the roof top pitch and also where the roof will meet the side walls the back will be a piece I put in after and just pencil round once the roof is on. Help would be...

my boiler is getting on a bit I do want to change to a combi but cost is a factor at the moment this is my first house. I may look for a electric set up with a good sized head.

Hi all, I currently have a electric shower that is about 10 years old and the thermostat has given up, I will be replacing my bathroom soon and ripping it all out. I am wanting to replace the electric shower with a normal shower on a three way diverter valve (one control for temperature the...

Hi thank you for your replies, thought there would be a few that didn't like private plates. Think I will list it on Ebay for £300 bid and see what happens.

Hi All, I own this plate - Y44 EAH Wondered what value you think it's worth?[/IMG]

Thank you for your help I am going to inspect the existing fan and ducting in the loft and probably re duct and replace the fan the existing fan is a pull cord but has a main switch on the outside of the bathroom wall but it near the ceiling.