Search results

[/url] Theres no room left in the lamp void when you put the choc block and wires in there as is not very deep .~I was thinking of using a architrave back box but wasn't sure if there was a specific box for this situation thanks

Im not sure how to fit this light and get all the wiring in If it was a stud wall it would be easy but mine is block work.I was looking for a mini backbox but i cant find one or use a normal back box and put a plate over it but this is more hassle to find one that matches this is a new...

Yes either side of a bed Taylortwocities link is kind of what im after ,obviously i would want all the other sockets and main light switch to match

I didnt make it very clear this is for my house not a caravan, the caravan link was the only site i could find with a similar product as an example They would be separate lighting and ring main circuits Basically its for my bedroom 1x switch main light 1x switch bed side light 1x...

I'm after a 2 way light switch and socket in one combined unit ( a bit like this http://clearcutconversions.co.uk/product/cbe-double-240v-sockets-12v-light-switch/ I've seen them in hotels but cant find them to buy thanks

I've built a shower cubicle ie: 3 tiled walls 1 door The shower door/frame has 2 separate metal post which screw to the wall and the door frame screws to that I dont think it matters?? but should i silicon the tiles to the shower tray then fit the frame or fit frame then silicon

I've cut the worktop for my bathroom sink and need to seal the bare edges My plan was PVA the edges then smear silicon on the edge then a bead of silicon on the top edge to seal the sink to the worktop nyck

Whats the minimum thickness ply i could use to go over 18mm chipboard I've been reading it should be 15mm?? The problem is 15mm ply plus 10mm tile plus 10-20mm adhesive im going to need a threshold 35-45mm and carpet floor the other side

Gumtree someone local that is just dust on the thread

To test your idea You could drain the water from the Shower trap only so its acting like the vent .Then see if the other traps pull when you empty the sink,washing machine etc .If they dont then extend the pipe . I'm just a DIY'er so i dont know the rules and regs but i thought you could try...

I got worried for a minute and checked again but they are new and unused . Ill just PTFE they as normal thanks

Do you have to apply tile adhesive to floor before laying 6mm Hardie?? My floor is pretty solid and flat .The reason i want to avoid adhesive direct to the floor is when i say in 10 years want to replace the tiles i don't have to spend hours getting the adhesive off or replace the whole floor...

I bought a pair of Comap chrome radiator valves a while back but have only just gone to fit them One has got a pink band round it the other hasnt .I'm not sure if the pink band one goes on the feed or return or what the pink band is for ?? thanks

Sorry for the confusion ,my question wasnt the height of the AAV but if it has to have its own feed or T it off the sink waste thanks

Yeah it would be higher than the sink, it just what setup to use thanks

I was going to fit a 110mm AAV but i cant squeeze one in so i'm going for a 40mm one. I've shown 2 options on the photo which is best or would any of them do. thanks