Search results

here is some pics

tried this and it does not

my Power devil 3.5 Hp petrol mower stats from first pull but stops again after few second. any idea why and how it can be fixed.

the recommended thickness is 50mm by the provider. all the client can do is follow the provider instructions to prepare the floor as level as they can and leave it to the provider to laser it up and screed. this is what they are paid to do and they are the expert not the client. however, past...

porcelain floor tiles 10 mm in thickness with 10mm tiles adhesive

many thanks for your in put guys. UK liquid screed has come back to me and they re assured me that they have at least 40mm in that area. the also said that the screed they provided can work even at 20mm. most importantly they took full responsibility to handle any complains from the building...

the liquid screed provided by UK liquid screed LTD is very shallow. it was installed on Friday and was told not to check for at least 48 hours. however when I had a look today I noticed the under floor heating pipes of my sitting room are showing in nearly 2 third of the area., see attached...

woody, many thanks for your time. this is exactly what I am trying to do.

I am trying to fit upvc slide door in between the door and the boarded window, see pic. the width of the door will be 2100mm. Hence, I need to brick up half of the door and half of the boarded window to make the required space for the door. is there any way I can do that without taking the two...

when I lift the door handle, the top and the bottom tongues engage with the frame and the door looks without an issue. however when I open the door, turn the the handle down, only the upper tongue re tracts and the bottom one does not. it only retract partially just about to open the door...

he said it was not. he is very awkward and heard to talk to giving time as an excuse. the original plan was to put concrete beams and blocks as we did with the extension. however, when I took floor board off there is not much space underneath. if I install the block and beams I end up with...

my house was built in 1963 on a concrete platform of 300 thickness. I am building an extension and renovating my main house in the same time. both planning permission and building reg was granted Feb. 2019 by my local authorities in the south west. the work has started but due to corvid and...

the downstairs is all tiles as I was able to screed it. but this is the second floor where it is going to be laid joists, therefore, you can not use tiles

I am upgrading my house and have installed under floor heating. what is best floor that is suitable with underfloor heating, is it Laminating real wood bamboo and what thickness

Many thanks for the advice, worcester bosch genuine part has been fitted

good point, however, I believe most combi boilers work on the same principle when it comes the DHW output. also it is sensor responsibility to to shut the boiler down when the temperature accedes the limit. furthermore, both sensors looks exactly the same , identical

I did more test on the boiler today and found out that both the fan and the pump work for a short time then they stop when there is a demand for DHW. this gave me the indication that the microswitch is working and does its job by passing the order to the PCB to fire the boiler However, when...

This boiler dose not fire up when there is a demand for DHW, but the it fires up when there is a demand for CH. The diverter valve works ok its head extends when there is a demand for DHW and engages with the microswitch on top of it. Also the pump is working but the boiler does not fire. I also...

I have extended my house from 4 bed detached house to 6 beds with 4 bathrooms. I have also replaced all the windows and upgraded the CH to all underfloor, both upstairs and downstairs. 3 manifolds, each serves 6 zones. both DHW and CH are currently supplied by 28cdi Worcester combi boiler that...

how to contact the landing light to 3 switches; one at the bottom of the stairs, one at the top of the stairs and the third onw will be further down the upstairs landing. I have wired 2 way lights and I assume the the third switch (which is the further down the upstairs landing) will be the...