Search results

So, replacements can be had but they are quite pricey. Is there a way to convert a 1 feed and split it with a tube to 2 flex venturis? http://www.amazon.com/Char-Broil-3384253-Universal-17-Inch-Burner/dp/B000KKKDSE

Nah the problem is on the inside of the burner, got rust in it. The BBQ is fine so just replacing the burner should do the job but if I run 1 tube and split into 2 the pressure might be less for the burner?

Very British answer - have you been reading the Daily mail too much ;)

anyone anyone? :)

I have an old Charbroil BBQ with 1 venturi going into a burner. I need to get a replacement as the burner is pretty rusty/old and doesn't burn effectively any more (slightly yellow flames, cold and hot spots on the BBQ). However, most replacements seem to be 2 venturis. Is there a way to...

I have an old Charbroil BBQ with 1 venturi going into a burner. I need to get a replacement as the burner is pretty rusty/old and doesn't burn effectively any more (slightly yellow flames, cold and hot spots on the BBQ). However, most replacements seem to be 2 venturis. Is there a way to...

new house, new tiles, 1 light with earth, live, and neut. Are there regs on whether you use screws or sealant?

I'm trying to attach some lights to bathroom tiles (connected to electrics) but am worried about cracking the tiles if I drill into them. I already tried some heavy duty tape but it doesn't seem to hold either from humidity or the tiles are not 100% flat. Would no more nails work or silicone...

How do you measure the tempeature of a radiator? So, across the whole house, radiators should not differe in temp by more than 12 degrees? At the moment, they all have the thermostatic valves turned to full.

what's d19 mode? Can I do that on the digital control panel on the front of the boiler?

vaillant ecotec plus so yes I assume so.

How do you turn the pump speed down on a boiler to stop the whistling sound in the radiator pipes?

Can't I just take the front off and not touch any of the inside parts?

Pushed it in but it's stuck and won't go any further so I can't push the new knob into place.

Didn't overturn it, just came back one day and it had fallen off! But how do I fit that as the axle still looks like it is inside the boiler part

the radiator temp control knob seems to have broken and I can't turn the rads up or down on the boiler. Any ideas how to turn this setting up, they were on 3/4

It's a Vaillant ecotec plus. How can you turn the pump speed down? I turned the temp down but didn;t seem to do much.

Landlord won't pay for any of that if there's a cheaper solution like turning the pump speed down but I don;t know how to do it. All the rds make the sound so if the valve is turned off on all of them then they won't work?

It's a Vaillant ecotec plus. How can you turn the pump speed down? I turned the temp down but didn;t seem to do much.

they are on the left hand side of the radiators as you look at it