Search results

Appreciate that - thought tho if the main pump was not working properley then it wouldnt heat the cylinder up as quick therefore there would be a lack of hot water on demand. The shower pump does have its own supply off the top of the hwc via a surrey flange.

Say for instance;- Hot water cylinder = 110 litres pump rating = 9 litres per min say 50/50 hot /cold water then amount of hot water pumped = 4.5 litres per min therefore it will take 110/4.5 = 24 minutes to empty the tank Or is it not that simple?

Yeah me too. Just tried shower again and ran well. Deffo seems like a lack of hot water. I got the shower brand new off a relative who never fitted it - this was a non pumped model. I spoke to Aqualisa who said just fit a separate pump so after taking alot of advice of here bought a...

I have fitted a new shower. This consists of an Aqualisa Axis Digital Shower complete with a monsoon 3 bar hp pump. The pump is located in the airing cupboard next to the hot water tank in the airing cupboard as stated in the pump instructions. The hwc is a standard household size and is...

Cheers Rocks will give that a try.

Hi just trying to put a new bulb in the main oven on my Tecnik TKC1285. I have screwed the glass cover off but the bulb seems fast. How do you remove the bulb? Is it a screw or push and twist? Cheers

Cheers for reply. The wall is between 2 paved driveways at front of the house so no problem re locall access or place to put skip. Will tell her to get some more quotes. Thanks

Hi, My mother wants her garden wall replacing. Its about 14m long x 0.5m high and is built in 9" brick with brick on edge to top. It is assumed that the existing footing and maybe brick below ground can be reused. She has been quoted 2 grand incl materials. To me that sounds high...

Cheers lads - It sounds as easy at it looks! We all know the truth is somewhat different. Must get a hat too :D

I have fitted a new shower cubicle and ceiling is at the moment new plasterboard. Thought as its such a small area I would give it a go myself (fool). Couple of questions;- 1) As its in the shower what plaster should I get? 2) Any good diy guides for ceilings? Thanks Steve

Thanks for the link. I will pop over to b&q and take a look. Cheers

My daughter would like to decorate her bedroom with white glittery walls - kids eh! Any ideas how this could be achieved? Cheers

Cheers for replies. I have heard something about chimney balloons but sure as eggs are eggs someone would light the fire with it up there! Yes I was sure the setee wasnt helping. Bit difficult to rearrange due to room layout. I have pulled the settee away to leave about a foot gap. For...

My living room has always been the coldest room in the house but this week has been terrible. The house is a newish house built by Crosby homes around 18 years ago and will have cavity wall and some insulation altho not to todays std. The room measures approx 22' x 14' and has one large...

Hmm sounds like the ply is a bit thin but as you say it sounds more a bonding problem. Poss the ply used not being ext grade. The trowel was a circular 10mm one. No probs with mixing and using the adhesive I only nixed enough for 4 tiles at a time. The pdf data sheet is very interesting as...

Cheers for reply. Its overboarded with normal 6mm ply over original t&g boards - there is no flex in the floor its really sturdy. The tiles are common 450 x 300mm Ceramic floor tiles - all the same - edges are cut down to 3/4 tile as I have centred the pattern on the floor so no small tile...

I have just finished tiling my bathroom floor. I have used BAL Rapidset Flexible Adhesive onto a timber overboarded floor. However I noticed one tile seem loose and when I tried lifting it it wasnt stuck down at all. It hadnt bonded to the timber. Dreading the fact now I have to start all...

Its a Glow Worm Space Saver 56/60

Northwich

Any recomendations? Cheers