Search results

I need to replace a couple of kitchen doors but don't know where the kitchen came from. Can anyone help based on the photos below please?

It turned out to be a SC570/WH/MULTI that the fantastic people at CQR sourced for me. I can't recommend them highly enough! Also big thanks to @secureiam who talked me through the process of replacing the door sensor.

Thanks for the heads up. I'll have a look later.

Can anyone give me an idea how to make a better seal on a uPVC casement window on the bottom side opposite the hinged top side. I've attached a couple of images for reference. TIA

Thanks for your advice

Is there a maintenance mode for this alarm so that I can remove the cover without setting it off?

Here's an image of the door sensor:

Thank you @secureiam

Thanks for the reply @Handymanjo - the door sensor is surface mounted.

Thank you all for your responses.

Hi all, I am hoping for some help with a family member's alarm system that was installed at the same time the house was built. It is a Texecom Premier alarm and the main door sensor seems to be faulty. I have armed the sytem with the door shut and the exit beep is still intermittent rather than...

Can anyone tell me if the cast iron style guttering is worth the extra money? I'm looking at updating it on my Victorian house. If it is worth it where is the best place to buy it? Thanks

I've removed the old lathe and plaster from my Victorian walls and plan to batten out and use 12.5mm plasterboard. Can I insulated between the battens? What's the best material to use?

How do I access the toilet seat nuts and bolts on the following please?

Thanks for all the responses. I managed to remove the throat plate and screw the collar to the stove from underneath. All sealed up and drying ready for first small burn tomorrow.

Would there be an issue in screwing the collar to the stove from underneath by removing the throat plate temporarily?

The pipe I have is vitreous pipe and has to be cut to size. Do I have to screw the collar in as I'm going to be dealing with due cement anyway?

I'm installing a wood burning stove and the collar is attached by three screws inside it. The question I have is how can screw the collar in if I'm fitting the stove pipe to the adapter poking out of the closure plate, slipping the collar on to the pipe and then sliding the stove into position...

Looking for some advice please. I need to remove a section of joist that is sitting on the padstone of a newly built structural wall in order to fit a steel post. The issue I have is copper pipes that would prevent 4x2 or 6x2 noggins connecting joists either side of the joist to be cut away. The...

Thanks Freddie, I've been thinking about how the railings will be fixed to the flat roof.