Search results

Hi I have a Capello mono ceramic disc kitchen tap ,i have removed the little caps so that i can fit in an allen key to remove the cover of the tap so that i can put on silicon grease because its gone a bit stiff,but cant get any allen size key to fit ,had a closer look and it seems that this...

Hello Thinking of purchasing a LG washing machine with a Direct Drive just wanted to know are these w.m any good are they reliable, these Direct Drive systems,any info would be helpful. Thanks.

Thinking of purchasing a Siemens fully integrated dishwasher SE655330GB ,it states in the brochure that "cold fill recommended" does this mean that it will only have a cold fill, or hot and cold fill or do i have the option to choose.If it does have both hot and cold do i blank off the hot at...

Not to sure if these pictures have been on this forum before,got them from another forum.

Would a 15 mm plastic push fit on a !/2 inch imperial copper pipe Thanks

Hello, Approx 5 yrs ago i had pvc double glazing installed to the back of the house from a local company,i requested that i wanted it internally glazed.The company no longer exists. The problem is that the pane of glass in the frame is misting due to broken down seal.It started with 1...

Hi, i have read the forum about testing the pump to see if the shaft is spinning by removing the silver screw on the pump.My question is if you remove the screw does water come out continuosly if so will you be able to see shaft spin if water is coming out.ive also read that a small screwdriver...

Hi Guys When testing for a gas leak on pipe work on a gas meter using a manometer,ive read that you need to allow 2-4mbar through the Manometer using the main gas cock than shut,if slow rise in pressure,indicates main gas cock is letting through.If o.k than open valve and allow pressure to 20...

Hello, what is the correct way to to wrap ptfe around a threaded male fitting, in some plumbing books it says clockwise and others it says anti-clockwise.Also how many wraps of ptfe are needed around the fitting that goes into the bottom of the radiator ,the tool used for the fitting is called...