Search results

  1. sajeel

    Replacing a Hot Tap and a Cold Tap with 2 mixer taps

    Depends on how old sink is and the main goal is to be able to pass space for two pipes if the original bracket cant be used then then the shank and bolt can be used and the plate and rubber may require modification an angle grinder can trim plate and you can cut rubber seal with knife in worst...
  2. sajeel

    No Hot Water

    Tony have you gone quiet or did you choke on some gas
  3. sajeel

    Menvier M800 firmware flash

    Get USB Type A to Type B cable, plug A into PC, completely power down mains and battery, plug B into panel, turn on, panel will identify to PC as a different device to usual (i.e with power already on before connecting USB) Run software, follow instructions.
  4. sajeel

    Menvier M800 firmware flash

    rather than moaning why dont use post the correct one
  5. sajeel

    Replacing a Hot Tap and a Cold Tap with 2 mixer taps

    not a problem glad to be of help
  6. sajeel

    No Hot Water

    Haha very funny, i use joint compound something like water hark which is wras approved will be sufficient
  7. sajeel

    No Hot Water

    that is another option go to fully pumped system
  8. sajeel

    No Hot Water

    great hope you get sorted hopefully an air vent will bleed system and you will have hot water back, some pics may be helpful
  9. sajeel

    Replacing a Hot Tap and a Cold Tap with 2 mixer taps

    hi, 1) install tap blank like this http://www.screwfix.com/p/tap-hole-stopper-chrome-plated/40626 Then use this to mixer tap http://www.screwfix.com/p/flexible-tap-tails-10mm-x-15mm-x-300mm-2-pack/4565g Purchase mixer tap and all done . 2) not impossible but complicated as you would need to...
  10. sajeel

    No Hot Water

    In that case the boiler will be heating the tank you should have immersion heater as a backup ?
  11. sajeel

    No Hot Water

    you need to ensure diverter valve is working the fact that heating is working would indicate the diverter valve is not working
  12. sajeel

    Menvier M800 firmware flash

    was just a guide
  13. sajeel

    Menvier M800 firmware flash

    http://www.texe.com/uk/uploads/INS552-3_Premier_Elite_Flasher_Instructions.pdf
  14. sajeel

    Daily gas consumption (when central heating off / in summer)

    30kw x 12p = £3.60 if your meter is metric not cubic that sounds about right depending on size of property with regards to your hot water you need a 2 channel timer something like this should do...
  15. sajeel

    Floor creeks after wall instal

    thanks for pics what plywood thickness did you use ? and did you put staggered nogs ? The creak is due to movement so you need to locate and secure by either adding more nogs using thicker ply or more screws you could also another thin sheet of ply on top of current floor with longer screws to...
  16. sajeel

    potterton profile 30e burner issue

    The boiler has had safety test and was certified gas engineer i dont know why some people just jump to assumptions.
  17. sajeel

    Hive wiring question

    thanks john mystery man did you resolve ?
  18. sajeel

    Hive wiring question

    cannot see pic also who installed hive system as i suggest to get them back, if you do need help we will need more info such as model of hive and boiler.
  19. sajeel

    What is it with this site?

    car forums people are much nicer
  20. sajeel

    Floor creeks after wall instal

    please specify what type of wall installed and what floor you have so we can some advice pictures may be even better
Back
Top