Search results

Hi All My daughters play centre is currently about a year old and the weather has started to have an affect on it with the current medium oak colour finish looking patchy. With this in mind, can anyone suggest a suitable preserver/protector? I know some preservers won't "stick" as of the...

Thank you very much. I'm glad it made sense and you understood what I meant. I was thinking LSX so will have a look what I have available tomorrow. Thanks again for the response.

Hi All Probably a real simple answer but I'm stumped so thought I'd ask on here. Currently fitting a dual fuel towel rail, all is ready but when I fit the element and the dual fuel adapter, the heating pipe inlet is in the wrong position. It has no wiggle room to tighten it up another...

Hi all We are just about to start replacing our bathroom and will be using a dual fuel towel rail with element so we can still heat the rail up in the summer when the heating is off. We have seen a few touch screen stats and programmers and wanted to know if you had to buy a specialist...

Looked at the lantern and was fine but he is going to look at the floodlight next but at 10pm last night he didnt want to get the ladders off the van and annoy the neighbors.

Sorry, not something that he told me when discussing with him and I didnt ask for results (I've not had a lot of electrical knowledge so not the sort of question I would have thought of).

Morning All Im not an electrician but had one look into this issue last night and coming back tomorrow but was after a little advice/suggestions. One of the MCB for the lighting circuit in the kitchen is tripping. The power feed comes direct from the MCB into a junction box where 3 sets of...

Hi All Just finished tiling the utility room floor and not looking at options for the transition down from the tiled floor to the concrete floor below. This would usually be ok but the issue I have is the height at one end of the doorway to the other is different, ie lower on left, higher...

I will look tonight... I wouldnt like to guess.

Hi Thanks for the replies, much appreciated. I am not at home at the moment but looking online, it looks like we have a Worcester Bosch Greenstar 18Ri boiler. Based on the literature online, it says the temp gauge on the front of the boiler ranges from 35 to 82°C. I'd say its about half...

Increased the cylinder stat a few weeks back to 75 ish in the hope that would get around the issue. I've got no idea round the calling for hot water, how do I find that? As far as I know it's working, but I'm no heating engineer and can only go based on the tests I've done in terms of...

Hi All Got a problem with our hot water/heating whereby the hot water goes cold after 1 shower (average time running water). We have a Worcester Bosch boiler with cylinder and cold water tank etc etc. the shower is an aqualisa power shower which obviously is powerful and does pump the...

Thanks Mick. I will give it a go.

Hi All Apologies if it's not the right terminology but our heating appears to be split in 2 halves. What I mean by this is I drained my entire heating system down today but after draining it down, we found 4 rads still full of water. We then discovered another drain off valve which was...

I'm not 100% convinced it's only when the heating is on but does seem that way when I'm in the house... Or both on together. I leave the house in the morning before the heating comes on but the water is on and at that point there is no noise. Plan is to put cleaner in the system tomorrow and...

On the ground floor, 4 of 5 rads do have trv's. Upstairs none.

Worcester green star boiler. Standard system with cylinder, tank in loft etc. I don't really know what else to say, what else?

Hi all I've had a look through many posts but not been able to nail my issue so thought I'd post a new thread. We have a really loud vibrating type noise coming from the pipe work upstairs which seems to happen when the boiler kicks in. As far as I can see the pump on the heating system...

Thank you!! I will have a play with them later.

[/img]