Search results

  1. S

    immersion heater termostat cut out problem

    My reset button holds, pops at whatever temp I set it at but continues heating. I'll get a new one then disassemble the old one and post a pic if there's anything to see.
  2. S

    immersion heater termostat cut out problem

    Hopefully that worked! If not check in my albums. Live (brown) on right is between the element connection and the thermostat, live (brown) on left between electricity supply and thermostat. Neutral (blue) dirct from mains to element post. Earth on earth post. Any ideas or just a faulty...
  3. Untitled

    Untitled

  4. water heater

    water heater

  5. S

    immersion heater termostat cut out problem

    Hi, I have an immersion heater with an 18in thermostat with an adjustable temp cutout and reset button. The problem I have is that although the reset button 'pops' out when the water reaches the temerature set (65 deg) the water continues to heat up - basically the reset bit is not cutting...
  6. S

    JG Speedfit - temperature question

    Hi, I have just installed some pushfit plumbing in my home and some of the fittings state do not exceed 65 degrees. This shouldn't be a problem but I know that occasionally my water can get hotter than this if I have an open fire burning in my house as there is a back boiler in it which also...
  7. S

    Downstairs toilet and kitchen door question :)

    Hi, Simple question, how many doors do you have to have between your kitchen and downstairs toilet? I have no kitchen door, just an archway in to it and am building an extension that has a toilet in. The toilet obviously has a door. I've done a search on here and tried to decipher the...
  8. S

    installing downstairs toilet - venting stack question

    Magic, Thank you Blagard. So as my new toilet floor is less than 1.3m above the base of the drain (sewer) it won't need to have a vented stack and i'll get one of those WC connectors with the vent boss to connect the sink to and get a trap for the sink with an AAV on correct?
  9. S

    installing downstairs toilet - venting stack question

    Hi, I am putting in a downstairs toilet but it doesn't connect to the existing vented stack that my upstairs toilet connects to. Instead the waste pipe runs under the floor directly to the inspection chamber of the sewer where the current stack connects to. The new toilet waste pipe is...
  10. S

    connecting new toilet to existing sewer

    so I can put a bend in the new wc run providing the bend aren't too steep? That is what I'm trying to clarify I guess (like the blue pipe I drew but connecting up behind the back of the manhole)?
  11. Picture Title

    Picture Title

  12. S

    connecting new toilet to existing sewer

    The existing chamber is about 1.3 metres deep and as you look down it ith has the waste from upstairs toilet running through the middle in the direction of the arrows on the black 'pipe' drawing and also the current kitchen and upstairs bathroom waste water running in to it at a slight angle...
  13. S

    connecting new toilet to existing waste pipe/sewer drain

    Hi, I am at the head on of a sewer (no one upstream from me). I want to put a new toilet in downstairs and connect to the existing foul waste drain/sewer. My builder has said that you cannot have any bends in the waste pipe between the toilet and the sewer. Having looked at the...
  14. S

    connecting new toilet to existing sewer

    maybe I should post this in plumbing section?
  15. S

    connecting new toilet to existing sewer

    Hi, I am at the head on of a sewer (no one upstream from me). I want to put a new toilet in downstairs and connect to the existing foul waste drain/sewer. My builder has said that you cannot have any bends in the waste pipe between the toilet and the sewer. Having looked at the building...
  16. Untitled

    Untitled

  17. S

    Thermalite Turbo blocks u values

    :) I've spoken to my BCO and found that I cant use them. Cavity wall from top to bottom inside it is (or installing a lintel on top of a block wall and then building a low cavity wall on top of this - seems like too much aggravation). Thanks for reading though.
  18. S

    Thermalite Turbo blocks u values

    Hi, I am building an extension which is in 2 parts, one section set at a slightly higher level than the other (one part is at current floor level, the other part is lower to help prevent light loss from next door) the wall between these 2 sections is mainly internal but has about 200mm...
  19. S

    Sewer pipe through foundations - building regs

    It looks narrow, but it hasn't been fully excavated yet (will be today). The sewer also passes over a 90deg corner in the foundation. the trenches are all 600mm wide and vary from a metre deep to almost 2 metres as the garden is on a slope. The water company is all sorted, no build over...
  20. S

    Convert lofty room into two floors - regs ?

    I'm no builder or BCO but I am building a single storey extension on my house and I had a similar outhouse which I have knocked down to allow me to extend the kitchen and put in a loo shower and another bedroom/office. In answer to question 2 - My BCO said that The rear face of the out house...
Back
Top