Search results

Get a sparky to do it

Best find an electrical wholesalers & get a Crabtree type C rated at 6 amps, should cost around £7.00 + vat

What type of Mcb do you have, does it have a switch on the front or has it got a button?

Phoned up Baxi , they quoted me £175.00 parts & labour for an engineer to call & repair the problem, but it would be an additional £275.OO if the problem was with the heat exchanger. Decided to take the second option, which was to take out their 12 month cover scheme for £209.00. This would...

That`s what I thought, but it`s obvious that people still believe that they have to bond directly from the MET

That`s what I thought, but it`s obvious that people still believe that they have to bond directly from the MET _________________ moderator edited to correct quote

Whilst on my 16th upgrade about 3yrs ago, I recall my lecturer informing us that all central heating boilers have to be bonded direct from the MET, as you do with gas & water. Recently, my mate had his boiler replaced, & the plumber said exactly the same thing, although I cannot find it...

I don`t know, maybe I have a problem with the expansion vessel, hope not, tooooooooooooooo much money to replace

Thanks olski, just wondereed if I could go back to the engineer to get him to come back & reset the pressure without paying. You have answered my question.

ok, disconnect both fittings,check the wiring behind them for signs of overheating, ( make sure that you terminate the cables into connector blocks), then try switching your mcb on. If it stays on, & your rcd doesn`t trip then bobs your uncle, if not, then I`m afraid you`ll have to trace the...

Is there only one metal fitting on that circuit ( the ones with the halgens on it)?

Has the halogen fitting have any internal components, ie ignitor, ballast, or is it a 240v halogen bulb?.

Any chance of removing all lamps from that circuit, & then trying to reset the mcb.

Does this lighting ciruit consist of any that may supply outside lights?

I`ve noticed that the expansion vessel for my boiler is situated at the back of the boiler. Is it easy to get to to take a pressure reading, or would the engineer ( not going to attempt this by myself ), have to take the boiler off the wall. When you have your boiler serviced every year, is...

I have a 3yr old baxi combo 105e, the problem that I seem to have is with the pressure which seems to increase to around 3 bar either when the heating is used or when the hot water is used. This causes it to discharge water out the overflow pipe. Had it serviced 3 weeks ago as I noticed that...