Search results

After doing some research I have 20mm boards for the false wall and 6mm boards to cover the whole floor. I have a tanking kit to cover the joints and a wet room drainage tray. I plan to cut out the floor for the tray and build a frame to sit the tray on. This will be level with the floor...

The PCB's on these have problems with the solder on the boards. Look for cracked solder.

Hi they will be on the slope.

Hi I am changing my bathroom to one with a walk in shower and due to it being a loft conversion the celling has different slopes to it which block the light. I would like to fit adjustable down lighters above the bath and above in the walk in shower area as well as a extractor with built in...

Hi All Continuing from This thread After advise on shower screen I have decided on the wet room route. The floor is a chipboard tongue and groove upstairs in a converted bungalow done at least 10 years ago. There is some old tile adhesive on the floor There is some movement when you...

Thanks for the advise guys. Not going down the screen route now and will make sure the floor is screwed down. :)

Thanks Ian I will give it a go. I am OK with plumbing and tiling so hopefully will be good. I will let you know how I get on it will be a few weeks as it's the guest bathroom so won't be rushing. :D

Thanks I would like that and I will be tiling the whole bathroom with Limestone tiles. Are these really OK to self fit as I heard they leak easy, Would something like This be OK.

Hi all I am fitting a shower upstairs and the pipework is already there as it looks like the bath used to be there. I plan to fit a false wall at the rear and a glass screen to the left. The problem I have is the ceiling angles down and so any screen off the shelf would be too high...

Hi yes it is.

Hi my Samsung RS21 Freezer has a problem, the fridge works ok and has had the samsung recall parts changed about 18 months ago. The freeze does not work but gets cool when you can hear some gurgling but gets warm again when the gurgling stops. Do you know what the problem could be and what...

The door hinge pin keeps comming out of the hinge on my upvc door how can I stop this?. Thanks

Vailant turbomax combi boiler with 13 rads. The last rad on my system on 1st floor (furthest from the boiler) is cold and only heats up if i turn the rest off. This is a newly added rad by the previous owner when he had an extension done and it is supplied via plastic pipes. Do you think...

Update engineer come today and changed the gas valve. It was full of deposits. He said this was from the gas pipework. All working ok again for now. Very happy thanks

Thanks I have re booked them to come out and will keep you informed.

I purchased a property with a valiant boiler turbomax 2004 model it did not work as the property was empty for a while. The valiant engineer changed the fan and the flow sensor for the hot water this seemed to work ok but it kepped losing water from the pressure relief pipe. 2nd visit...

Thanks I think I will do a full flush while I have the system drained.

Thanks yes the boiler will be ok as I will be removing one of the same size at the bottom of the stairs as we have opened them up and now there are two rads about 3 feet apart. This is not near the porch unfortunately. To flush should I refill then open the filling loop and the drain at the...

Hi I have a vailant combi boiler system to witch I would like to add a rad to. There are 2 22mm pipes running through my porch and turning at 90 angles with soldered joints. My plan is to change these to 22mmx22mmx15mm to branch off to a new rad. Does this sound ok and when I drain down can I...

no we have separate switches for thoose