Search results

  1. J

    Texecom Connect Part Arm Timeline Issues

    Does it work on other phones? Do you get any notifications if you activate the alarm when part set? Are you using quick arm? I know the timeline is made up of the notifications the phone receives so that's going to be the issue.
  2. J

    Texecom Connect Part Arm Timeline Issues

    Turn on part armed comms in area options.
  3. J

    c&k securitech 700l keeps beeping even after replacing battery

    In short, press the star key, should be no lights illuminated.
  4. J

    Thoughts on newer Scantronic EN, PD and I-ON panels?

    I'm trade, fitted an I-onG2SM a couple of years ago as I needed 10 wired zones. At the time I was using the Euro46 and didn't fancy adding in a ZEM for 2 extra zones (yes, keypad zones, I know) and was a good excuse to try it. Went in fine, inbuilt ethernet is nice with cloud/remote...
  5. J

    c&k securitech 700l keeps beeping even after replacing battery

    Is it a chirp? Like a smoke alarm type bleep? The 700L doesn't really beep unless it's the chime feature that's been switched on perhaps?
  6. J

    Pyronix Enforcer

    No the zone type is the same as input type, so final exit in your case. Input areas are the areas the zones is active in. The only other mismatch error I'm aware of is called input/area mismatch, that is when an input is assigned to an area that a keypad or user can't access. To prove/disprove...
  7. J

    Pyronix Enforcer

    Wireless mismatch means you have a detector learnt to a zone but haven't yet programmed a zone type in change inputs.
  8. J

    WCCTV Engineers.

    Not a WCCTV engineer but experience working for a company that integrates to them and public space CCTV in general. WCCTV won't be much use as even though their names all over it and it connects via their infrastructure it'll be going back to somewhere else, usually a control room. Happy to...
  9. J

    Texecom Keypad Constant ExitTone

    The Veritas and Premiers have different entry/exit tones. The wired keypad is the normal / correct tone. The wireless one beeping intermittently is a power saving feature. Switch off the power saving mode and you'll see what I mean. It'll sound the same as the wired pad.
  10. J

    Texecom Keypad Constant ExitTone

    Keypad assigned to a zone - presumably it's wireless? Press Yes and Menu together and turn off powersave mode. That'll give you the normal exit tones and the expense of a slightly reduced battery life.
  11. J

    Two DualTech detectors face to face?

    Should be no issues with DT's overlapping providing the microwave frequencies are different. Not sure about Risco but Pyronix put a sticker on their DT detectors to indicate which it is. Either 10.579GHz, 10.587 GHz or 10.595GHz.
  12. J

    Insite UDL Management software

    Not sure what you mean by IP Stack, but you can UDL via the Pyronix cloud using the panel's cloud ID, UDL password and engineers code. Panel needs to be setup to download via cloud.
  13. J

    Pyronix Tag - User Question

    I'll PM you
  14. J

    Pyronix Tag - User Question

    Only if you're using multiple areas independently. If you're using level sets then you're fine. What about the engineer code?
  15. J

    Pyronix Tag - User Question

    The default level settings are an engineering function, have you got the engineers code? Also which panel do you have? The other bits are user programming functions which you mentioned beforehand.
  16. J

    Pyronix Tag - User Question

    It's the default level that gets presented, not the only level available..... You can override this if your user has the appropriate permissions
  17. J

    Pyronix Tag - User Question

    OP, Set the default area of the keypad to C, assign all areas to the tag, Flexi-set set to no. Tag will arm and disarm area C all day long with just a swipe. If someone sets another area, the tag will still disarm the system. Tested here and it works. That sound what you're after?
  18. J

    Pyronix Tag - User Question

    I'm sure the OP will correct me if I am...
  19. J

    Pyronix Tag - User Question

    You haven't mentioned what panel it is, and whether it's level set or individual areas? Two things to try (not in front of my demo kit at the moment) - Assign A B and C to your tag but leave Flexi set off. With any luck it might just set the highest level it has assigned Failing that...
Back
Top