Pyronix Tag - User Question

[DIYSOS2018]

It's the default level that gets presented, not the only level available.....

You can override this if your user has the appropriate permissions

It’s all got a bit confusing...

How do I do these changes then?

 

[Josh_365]

It’s all got a bit confusing...

How do I do these changes then?

The default level settings are an engineering function, have you got the engineers code?

Also which panel do you have?

The other bits are user programming functions which you mentioned beforehand.

 

[BIANCO]

OP,

Set the default area of the keypad to C, assign all areas to the tag, Flexi-set set to no.

Tag will arm and disarm area C all day long with just a swipe.

If someone sets another area, the tag will still disarm the system.

Tested here and it works.

That sound what you're after?

Wouldn't that just set all the Areas if you turn flexi set off?

 

[DIYSOS2018]

The default level settings are an engineering function, have you got the engineers code?

Also which panel do you have?

The other bits are user programming functions which you mentioned beforehand.

Enforcer

 

[Josh_365]

Wouldn't that just set all the Areas if you turn flexi set off?

Only if you're using multiple areas independently. If you're using level sets then you're fine.

Enforcer

What about the engineer code?

 

[DIYSOS2018]

Only if you're using multiple areas independently. If you're using level sets then you're fine.



What about the engineer code?

I’m not quite sure on what you mean in terms of independent areas or level sets. I think based on what I’ve outlined though that I will be using the areas (A B C) independently?

Engineer code yes no problem

 

[Josh_365]

I’m not quite sure on what you mean in terms of independent areas or level sets. I think based on what I’ve outlined though that I will be using the areas (A B C) independently?

Engineer code yes no problem

I'll PM you