Search results

it says "Micromark" FSU 13W, 25-65W & 80W only The tube is slim and 4 foot in length

Thanks for the plethora of answers, people - Don't you just LOVE the internet ? Anyway, I have tried changing the starter but get the same problem so I've assumed it's not that.

Sorry guys but just a quickie. When I switch on the strip light in my kitchen, it lights up fine then within 3 -5 seconds, it goes out again. I've tried changing the starter but that doesn't make any difference. Can I just assume it's the bulb and simply replace it or is it something more...

Thanks a lot for that info. Worked a treat. :D

I'm having a similar problem. I've attached a couple of images at photobucket.com and I'd really appreciate if someone could tell me what to do with the wires. I've already done the fitting in the bathroom which just thad one red wire and one black wire to connect - simple. Upon taking off...

Not sure . . . the radiator in question is downstairs in the lounge whilst the boiler is in the kitchen and the header tank is upstairs

All three tanks (hot, cold and heating) are full of water

My decorators removed one of my radiators yesterday to plaster skim the wall behind it. They put it back on today and now I don't seem to be able to get any hot water. I mean the boiler comes on when I switch it on but it only stays on for around 5 minutes and there's absolutely no hot water...

I'd very much like to get rid of the unsightly trunking containing electrical wiring that seems to be EVERYWHERE in my hallway. I guess I know what needs to be done but I need to know how to make sure it's safely done and not going to cause me any problems later on. Do I just hack out the...

Thanks Pensdown that floating thing looks great but I suppose it costs a fortune to make, right ? I'm not interested in doing a shedload of cash on this but I'd appreciate if anyone could gimme a ballpark figure as to what something like that is going to cost.

Ok so I should just gice it a couple of mist coats with a light sand between each one then whack on the vinyl matt ceiling paint ? Thanks for your advice, guys . . . you're all brilliant !

i've tried finding a topic that covers this but I've had no luck so . . . My ceiling is made of reinforced concrete. I've just had it skimmed. I want to know if there is any way I can get the halogen downlighter effect without buying those awful rail lights. I'm happy to have a kind of false...

Just had the skim done on my ceiling. It's drying nicely so far and I'm planning on continuing my redecoration programme this coming Saturday. I've heard from more than one apparently savvy building types that once a skim is dry, you should give it a coat of PVA, allow that to dry and then...

Thanks guys ! Just hope he's good :wink:

But will I still be able to get a skim over that "dot 'n' dab" ? The idea is to get a nice, smooth finish for painting.

I've just replaced a wooden access panel in my concrete ceiling with 0.5 inch plasterboard. I'm wondering whether I've screwed up becuase there are a couple of half inch gaps between the edge of the plasterboard and the concrete where the old plaster fell out. Will the plasterer be able to...

I need to replace the ancient battens in a concrete recess in my ceiling (the water mains run through it). It's only 12 inches wide by 6 foot long and I'm going to cover the recess with 1/2inch plasterboard. I'm then going to plaster over it for a smooth finish prior to painting. Can anyone...

Thanks for your advice. Another mate has told me to take down the wood and replace it with plasterboard as there's no way on God's green earth the pipes are going to drip condensation on it as they've been SERIOUSLY lagged and insulated. Then a plaster skim ready for painting. Hope it works ...

Thanks for the tips guys - I'll have a go then report back.

It's real plaster with which had lining paper stuck on with wallpaper adhesive.