Hi
I have just replaced my burnt out panasonic motor in my dyson DC05 cylinder vaccum cleaner but I cant remember which terminals on the motor the brown and blue wires from the switch go! 1 terminal is fixed to the motor and the other one is attached to the motor but is on the end of a...
Hi
Got some black granite cosmos floor tiles which Im putting onto WBP Plywood floor. Im using BAL single part flexible adhesive.
Do I need to seal the tiles before I lay them or can I put them straight onto the adhesive?
ANy advice welcome
Ta
Hi
Ive bought 3 diecast 12v lamp fittings with 3 35x bulbs giving a total of 105w. I have a junction box and a suitable transformer. I have two cables sticking out of the ceiling where the 240v lamp was - I know which is the supply cable and which is the switch cable. I have 1.5mm sq twin...
Hi
Im tiling floor granite tiles onto a WBP and was thinking of using Everbuild Rapid Set Multiflex adhesive - Is this any good and will I need to prime the ply before hand? I was going to use BAL single part flex but too expensive!
Cheers
Hi
Just bout to start floor tiling on WPB ply and heard horror stories of using PVA as a primer. Are there any other products I can use to prepare the surface or can I just start tiling onto the WPB with flexi adhesive. Any hints welcome. Ta
Cheers
Hi
Im busy painting the staircase using a crown matt emulsion paint. The first coat went onto the white emulsion background smooth and flat but the second coat is coming out in a bubbly finish - you can see the tiny bubbles forming and its driving me mad. Its only doing it on the first coat...
Hi
I want to add two new ceiling lights on the upstairs landing (Brass eyeball type R63). I already have one and after inspection in the loft the existing one is wired in with an ordinary chocolate box type thing which in turn is wired to the lighting circuit cable.
Now for some needed...