Search results

I have been asked to fit some LED downlighters in a cabinet (made from MDF) The customer has already purchased these fittings http://www.aurora.eu.com/ProductPages/LampProductDetails.aspx?g=2988&c=81&b=71&oc=81 The LED's that came with it were not dimmable. Customer wants the lights...

Thanks again POD Its not actually my system. The boiler is either a Glow-worm Fuel saver 65f or 80f The system is real basic the boiler timer just switches on the boiler at times during the day The only way to switch the central heating off is to actually go up stairs and turn the...

Thanks POD I could not get the timer suggested but was told the Drayton Lifestyle LP711 would do the trick. This is its manual. http://www.heatingcontrolsonline.co.uk/instructions/LP.pdf I would appreciate some help with wiring this thing This is what I currently have. The...

changing a boiler timer to a ST9400a. the system is a gravity hot water system, so i read i have to set as a mini programmer if i have not got a hot water control valve. my question is how do i know if i have a hot water control valve cheers

It's a gloworm fuel saver boiler it's not a combi there is no instant hot water not sure how old the boiler is but over 10 years boiler works fine the clock gets stuck though

Could somebody please suggest a replacement timer that would do the job of this one Many thanks

The shower is 8.5kw Clipped direct No insulation Length 5m They are two boards The MK (Which is for the kitchen/Dining area, and a Wylex 3036 which powers the rest of the house 3 bed semi, two ring2, two lighting, immersion and radial to loft office. Tails will need upgrading as...

Thanks for the reply. I was hoping not to Henly Block the tails, which would be that case would it not with a RCD/MCB Shower Unit ? If I could source a 40amp MK MCB to fit the board and fit this RCD in between CU and Shower, That would be OK. Would It ...

Installing a shower. The CU is the MK board in the picture. I understand that these MCB's are no longer available? but you can buy a conversion kit to fit a new MCB/RCBO. Is that correct and would it be possible to fit a RCBO to this board. Thanks

Its one of those wireless sockets

Fascinating stuff, but I am well out of my depth with this. Any more pics of one in use

Hi Been asked to replace some light fittings. They are to light the underside of a long shelf unit that runs the width of the room. This shelf is about 400mm off the floor. The current lamps have been scorching items left under the shelf. The room uses GET wireless lighting, so I have...

Cables to new consumer unit 'may' be to short. I want to achieve making them longer I want to find a nice solution to the problem. Since screwed connections have to be accessible I wanted to put them in an enclosure. keep the connections separate to the new CU. keep it nice and...

The CU is isolated so the incomer is dead. I was a bit dumb with the CSA thing though. I was just hoping somebody would have an idea what the size of the meter tails would be if the circumference was 32mm. How do you work it out Thanks