Search results

I have acquired this tumble with a fault which I have sorted, just lack of maintenance, but I have now found that the small wires at the tiny connectors to the motor are broken. Hotpoint have stated there is nothing they can do, obviously offering an engineers visit, there appear no spares...

Hi All, please bear with me. The house has an old style fusebox, the fuses being the wire type. Fluorescent tube in kitchen wasn't working, checked 5amp fuse, and decided to rewire it anyway. No lights at all on ground floor, all other circuits working okay. Am going back now to check the fuse...

Hi All, I acquired this unit as the owner was dumping it due to it not drying the clothes. Yes, all of it was stuffed with lint and debris, so cleared all the filters and door ducting, then, using a net curtain wire, totally cleared the condenser unit. At that point both elements worked. Still...

Had to deal with a Heatrae Sadia Megaflo (210) unvented unit which was not heating, to find that both thermostats had failed. Now the price varies from £17 online to £85 from suppliers, but the delivery will take days, and the hot water is required now. I am in West London. Does anybody have a...

Having acquired some faulty machines, and played with a few, one gets to know that there are some similarities. However, some of the machines are identical inside and this is where the Kenwood KCD1W comes in, oh, and so does the White Knight 77AW, it's twin. Condenser tumble dryers are more...

Sorry to go back to this, but as I cannot get the answer from dealers, I need a front felt seal for a Hotpoint TDC32P - it measures 12mm wide and is to cover a drum circumference 121cm. either a direct replacement or a suitable suggestion as to adaptation?

Does anybody know if there are other TD's made which are the same model underneath?

Hi all, I have acquired this unit with the suggestion that the front felt has degraded. I have found masses of lint and muck so far, and am about to remove the front panel. This may be a silly question, but as I am having no luck in locating such a front felt seal online, does this machine...

Sorry to have to ask, but I have the above tumble dryer model. Having positioned a felt door seal on the inside of the drum opening, it is too thick for the drum to turn, any suggestions please?

On this model, a condensing tumble dryer, it appears that either I take the door panel off, or go in past the intake access to get to the motor capacitor...... any advice please? Cancel, now sorted .

Hi gang, I am in possession of Creda Concept Solarglo (electric) double oven. I can find no model identification on it, I have it apart, i.e. side, top and back removed but still cannot find a specific model number, any ideas?

Hi All, just in case anybody has time to advise on this; White Knight, not the easiest to get into, but not getting any heat and have checked wiring, thermostats and elements, all seems to be fine. I would like to check the exhaust thermostat but that is well secreted and I wondered if anybody...

I am sure that some of you will be comfortable with the Google home page today, though some will find it shocking.

Hi all, I have a Hotpoint VTD00 tumble dryer that seems to work fine, until I believe the reversal is reached, and I get a buzzing but due to not wanting to take off the side whilst the power is on, I'm not sure if it's coming from the timer or the motor? Any suggestions would be appreciated.

Not meant to reflect cultural differences, just a right mess, wherever it is.. http://www.dump.com/garagedoor/

I have a Hotpoint HUE52 electric cooker that I believe the timer has gone kaput on, but looking at the price of replacements they are almost the price one could pay for a second hand cooker. Is there any outlet which supplies used cooker spares that might have this item? Thanks.

Is it possible for me to insert a little piece of music which I think is relevant into a thread, in the form of a wave file? similar to how we insert an image?

I have an electric cooker (Hotpoint HUE52) that I want to establish has all bits working. I collected it and put it in my garage for cleaning, have tested all by continuity tests, but I supply power normally by standard extension cable, from a normal socket in my maisonette (first floor). I do...

Hi Guys, I have a LEC T434W fridge freezer which sadly the other night, I left the door ajar and it defrosted. Since, I have cleaned it, dried it and allowed it to sit. When I put it back on, it stays on, and on and on..... and though the fridge gets cold, and the freezer appears to be at a...

How does one get the switch out of the panel on a Hotpoint VTD00? behind is a tiny hole but I cannot see that inserting anything will release it.