Search results

  1. C

    Garage door remote problem

    Hi I have a Wickes Model 203004 garage door opener that was here when I bought this house in 2000, so quite old. The problem I have is that the remote control won't open or close the door, I have a push button switch in the garage that opens and closes the door fine. I have tested the remote...
  2. C

    Boiler Name

    Hi it turns out to be a Fagor Ecoplus FEB 20E combi boiler Had a leak on mains cold pipe and no pressure, now works for heating but not for hot water. No diverter valve just a flow switch on incoming mains and thermistor, I'm assuming it's the flow switch as when set to hot water only and you...
  3. C

    Boiler Name

    Hi I assume that is the model name, but don't know for sure Don't know how old the caravan is but I think it's pretty new. No manuals to be found. He said when he turns it on a red light comes on, then a yellow light, then the red light goes off and a green light comes on One large pipe which I...
  4. C

    Boiler Name

    Hi i,m looking for user manual for a boiler that has the name Vegas on it. It is in a caravan and is Calor gas fed, my brother in law is staying there and he phoned me because he can't get it to work, he doesn't know anything about boilers and if i can find the user manual i might be able to...
  5. C

    Technics amplifier SH-EH780

    Hi after a lightning Storm my amp won't turn on, I have checked the fuse in the plug and the internal fuse both are fine, checked circuit board land to relay. There is 240 v no voltage passed that so I'm thinking that there is a problem with the circuit that operates the relay. The numbers on...
  6. C

    Help removing tap handle on mixer tap

    A few gentle taps will usually release it protect with a cloth and tap one side the the other. Does your tap have just quarter turn or do you screw it down?.
  7. C

    Replacing Synchronous motor in gas valve

    Hi first of all I think you are talking about a 3 port motorised valve, is not a gas valve. Sounds like the lever is not making contact with the micro switch, if the lever is moving with no resistance it seems that the motor has opened. With the power removed the motor would have resistance...
  8. C

    How to connect to 6" old clay collar? - SOLVED

    You should have started off with a interceptor where you have connected to sewer then your manhole. In your other post imo you should avoid all those y junctions and fit another manhole and bring all connections into it separately, also internal manholes are not a good idea, the interceptor...
  9. C

    How to connect to 6" old clay collar? - SOLVED

    The rats will love that no Interceptor trap and Roding eye to worry them.
  10. C

    Water is leaking into my boiler

    Inner flue joint leaking I would think but you will need GSR fitter.
  11. C

    Vectra inertia switch

    Hi does anyone know where the inertia switch is on my Vectra 2006 car is please. The reason I'm asking is that a wall fell down onto the front of my car and now it won't start, I usually can here the fuel pump run when I turn on the ignition but can't here it now. I have looked on line and...
  12. C

    Puma Boiler - CH not coming on nor is there any Hot Water

    There is 1 under Boiler and Central heating faq's
  13. C

    Puma Boiler - CH not coming on nor is there any Hot Water

    Actually I don't think there is one only parts of it in the FAQ about pressure vessels sorry about that but I have never looked before just assumed someone had put 1 in. Basically on either 1 side or maybe both sides there will be a ball affix valve like a washing machine valve with a plastic...
  14. C

    Puma Boiler - CH not coming on nor is there any Hot Water

    Refill to around 1bar -1.5bar that should put out your low pressure led and your boiler should restart then you need to keep your eyes on it for a while to see what happens with your rad's etc.
  15. C

    Puma Boiler - CH not coming on nor is there any Hot Water

    Hi the red needle on the gauge is not really a needle just an indicator, the black needle being on 0 means you have no pressure in your system that's why the low pressure led is on, sounds like you have a permanent pilot boiler that's why the pilot light is on. You need to find a silver braided...
  16. C

    Black iron gas pipe

    iron pipe is normal for gas, but a gas hob should not be fixed with a rubber gas hose if it's above an oven, It needs to be rigid pipe with isolating valve
  17. C

    Potterton Puma 100e

    Around the head is four bolts which need an Allen key to undo then the head comes off which is the motor and impeller leaving just the back connected to the pipe work much easier than removing whole pump, Of course you have to isolate water and electrics tho.
  18. C

    Potterton Puma 100e

    Are you saying that when you undo the pump centre nut you can't feel the pump running? If that's the case then that's your problem. You can get just a replacement head for your pump.
  19. C

    Help on System Boiler

    Hi IMO if you can't work out a system boiler layout you would be better off not doing the job and risk losing a family friend.
Back
Top