flooring

hi guys and gals, I have just had a Forbo Luxury vinyl tile floor fitted and Eurocol 540 adhesive was used. There is now a slight discolouration appearing where the tiles meet, which I guess is the adhesive. any suggestions on how to clean/remove which won't damage the tiles? cheers for any...

Hi, I'm considering plywood for flooring (the main floor - not subfloor) throughout the ground floor of our new house. Considering buying sheets and cutting it into floorboards & treating it myself. Should I go for hardwood ply or softwood ply, and any particular grade and thickness? (I'm...

Hi, The lino flooring in a large room is too low, resulting in metal floor fixtures protruding 2mm from the surface. The height of the metal floor fixtures cannot be changed, and it has been sugggested that I have a diminishing strip to cover the protruding fixture. I'd ideally like to avoid...

Hi i'm after some advice on how i can restore or salvage my amtico flooring in the kitchen. We had a white plastic mat on the floor in which we placed our puppys water and food bowls. It looks as tho the water has spilled and gone underneath the mat and has marked the floor Any advice on how...

Floor by John Davison posted 10 Jun 2016 at 9:10 PMFloor by John Davison posted 10 Jun 2016 at 9:09 PMFloor joists by John Davison posted 10 Jun 2016 at 9:09 PMHi, we recently purchased a 1800s stone built house. The walls are approx 18 inches thick rubble filled stone. In the main bedroom we...

Evening all, Probably a stupid question to people in the know but i have hit a brick wall when trying to work out what my floor is made of. Its a 1940's ex council house. What i'm after knowing is: what are these tiles? What is their purpose? Do i need them? I only ask so i don't go taking...

Hi all, First post on here but this forum has helped me on many occasions with its useful information, advice and of course general banter! I am in the middle of a large house extension and renovation and it seems my builder and the glazing company have got their wires crossed and what I...

Hi Perhaps someone might be able to assist me pls. I will be putting in underfloor heating in a flat/apartment. The rubble has been cleared from between the joists. Insulation will be put in-between the joists. Then aluminium plates, resting on the joists, but sitting between the joists will...

I foolishly damaged a 3x4 area of my wall to wall carpet in my living room by washing it repeatedly and not letting it dry before I put a chair mat on it. I now think there is mould growing and various treatments I tried have not reduced the smell. There is some leftover carpet that I found...

Problem: Tiling a kitchen floor. Half is covered in bitumen (from parquet floor). Half is a new concrete slab. There is a 35mm level difference across the floor and is fairly lumpy. Possible solution No.1?: Use latex self-levelling compound such as arditex na. BUT: I am slightly worried...

Is there a trick of the trade to repair over-large and rough-edged countersunk holes? I have a lot of exposed plain pine floor-boards in my house and the woods is mostly in good condition, nicely sanded and treated with Danish oil, so it looks good. The boards are screwed down onto the joists...

Hi all, I am installing a new kitchen. The units come with a plynth that is 150mm tall and adjustable legs. We will be putting down laminate flooring (probably 8mm + 5mm underlay) which will be installed after the units are fitted (so they dont sit on the laminate). My question is: I have...