junction box

Hi, quick query, without all the extra info. I want to add another double socket in a bedroom. The socket that is in there which would ideally spur’d off is already a spur. I’ve traced the wiring back to a junction box which also serves another set of sockets I believe to other bedrooms (I’ve...

I just looked under my cooker and the installers left a junction box to what I assume is the cooler lying on the concrete floor. Is this safe? It says 30amp 3 terminal on it.

Hi, We have a telephone socket in our bedroom which I wanted to remove. There is a white internal cable which branches off into airing cupboard and then into the loft (and I think then goes down into guest room as there is another telephone point in there) There is also a black external cable...

Hi. Currently have one outside light that has an outside switch fed from the boiler fused spur (see photos). can this be converted using outside junction boxes and conduit so that I can have 3 lights at various positions (see photos). I naturally understand that this is probably a job for an...

We're in the process of renovating our kitchen. We've removed the existing tiles, and in the splashback area above the hob we found a small mdf patch hiding a junction box. I'll let the pictures do the talking but wanted advice on whats best to do. It doesn't power the hob, oven or extractor...

Hi, I have moved into a flat 3 floors above the ground floor and have an intercom if someone wants to enter the property. This cable runs across the floor (I think it used to be pinned to the skirting board) through 3 rooms to the intercom phone. I want to hid this cable under the floorboards...

Hello friends... The wiring in my house will need replacing in a few years. I wont be doing that!! I have a new consumer unit installed a few years ago and currently my electrics are sound. In my bedroom I have an old fashioned wall mounted socket. It's a right faff and I have a 4 way...

Purely theoretical question: What do you do when you have 6 * 1.5mm cables to fit in a heavy duty junction box that is only supposed to take 4 * 2.5mm cables? Eg. Ring in Ring out Switch Lights 1 Lights 2 Timer Extractor (3 core and earth) Do you Cram them all in? (Tight, but they'll fit)...

I recently cut back a hedge at the boundary of my property and uncovered this BT-branded junction box: The reason it has a cut black wire coming out of it is, I think, because this house used to be the show home for the development (15 years ago), and there was an office in the garage during...

Hi. I wonder if someone is able to advise me or point me in the right direction. I had been wanting an additional double power point installing in our master bedroom. I was ready to have this done by a qualified electrician but on returning home from work at the weekend I found out that my...

I have just purchased braided flex and a 5 point ceiling rose to take 5 E27 pendants. Also I have 4x5 point wago and 2x3 wago connectors to join all the earth, live and neutral wires. I plan on putting all this into a junction box with glands to fit the braided flex and flat 1/1.5 twin and...

Hi, I am replacing two lights in my living room, they are currently on a three wire ceiling rose system, unfortunately the new lights do not accommodate the ceiling rose system. I am planning on using a junction box like this https://www.tlc-direct.co.uk/Products/ASJ501.html? My only...