no hot water

Hi, I have a Chafoteaux Maury Britony combi se 80 ... Yes I know :( ... it came free of charge with the slightly delapidated flat I recently bought and worked fine for the first 3 months. The heating is working fine but the hot water is now luke warm at best and only fires up the boiler when the...

I wonder if any one can give me some advice. I have a Alpha CD25X Boiler that is also connected to a solar hot water system. The boiler is in cupboard it kitchen and next to boiler is the water tank for solar system. From what I understand a liquid travels through pipes from tank up through...

Hi We recently bought a new home that already had a Nest heat link and thermostat, which we have taken on. Everything was working well and the system had learnt our schedule, giving us heating and hot water at certain times of the day. Due to a kitchen refurbishment, we needed to move the heat...

Woke this morning to no hot water but heating was working fine. Checked the forums and checked all the common problems: Water and boiler pressure both ok Timer ok (hot water set to all day) No leaks and condenser pipe not frozen No error codes Tried running hot water with heating turned off...

Hi there, I am at my wit’s end with this problem which seems to have stumped all the plumbers in my local area and would appreciate any advice. I bought a new place in November which had been installed with a new Gledhill ES 150 l stainless steel unvented cylinder in March of this year. On...

We had a new boiler (ideal Max 24) installed in April. Long story short, house is 20 years old and pipes are microbore copper 8mm. We have no heating or hotwater. New boiler has never worked great. Had power flush, new pump, new divertor and ideal engineer to make sure boiler was not faulty...

I am hoping someone here can help - have looked through this very helpful forum and couldn't find a similar issue discussed. I have a Vaillant Turbomax plus 828E which works intermittently for both hot water and heating - it comes on sometimes and at other times it doesn't. From what I can tell...

so it's been freezing cold and our boiler now has an L2 error and refuses to work. i assume this is because our condensation pipe has frozen. the problem is, i can't physically reach it because our boiler is in the loft and the condensation pipe runs outside the house (i.e. up near the roof and...

20210210_191008 by jk1_1 posted 10 Feb 2021 at 7:18 PM20210210_192807 by jk1_1 posted 10 Feb 2021 at 8:14 PMI have a Heatrae Sadia Electromax Combi-boiler. CH works, but no hot water. This coincided with 2 events: a full bath of hot water the night before (may have emptied the tank), plus...

Hi everyone, I’ve browsed quite a bit over the last few days but haven’t been able to solve my problem. I have a megaflo unvented hot water cylinder. The hot flow into the cylinder from the boiler has a 2-way zone valve (Honeywell) inline. I woke one morning and was greeted with a cold...

Hello, I have a Vokera Linea 24 boiler. At times the boiler starts up, makes some noises for about 10 seconds or so, then stops. I believe this is an overrun cycle. Recently the unit has developed an intermittent issue where by the unit starts up, makes some noises, but does not stop: the...

Yesterday I was painting my kitchen, we have push-fit plumbing so I decided to remove my radiator to get behind the pipes and the radiator. I drained the central heating system, but forgot to switch the boiler off. Afterwards, when I put the radiator back, re-pressurised the system, bled the...

We have no hot water and it sounds as if the boiler is failing to ignite (when the timer turns the boiler on for hot water we just get a repetitive pinging/banging noise and only lukewarm water, while the heating system is fine). We did not have this problem until 2 days ago. Before that...

A little while ago I had my conventional boiler upgraded to a combi. Since then I’ve encountered several problems with my plumbing. One issue is that since the upgrade, my mixer tap in the bathroom has stopped giving hot water. I pointed this out to the plumbers that upgraded my boiler before...

I have an old glow worm 45-60b I bled the radiators in the house because of noise then found out the tank in the attic was empty.Fixed that then found I had no hot water.The radiators were working fine but no hot water.water pressure is fine On the hot water.Any help please.

Hello, Recently moved into a new property and getting some hot water issues. First noticed a problem a couple weeks ago when we moved in, the shower would go hot-cold every minute. I could deal with that for now so put up with it because when it was hot it really was hot. Could do the dishes...

Hi All, Hoping someone might be able to solve this conundrum. I have a hot water cylinder with a boiler. I recently drained the system and washed out the radiators. I have no hot water and no heating. The boiler fires up, the 2x two port valves turn the valve to their open position. The...

Good evening all, I hope someone can help. I have a PulsaCoil 3 that may or may not be on its last legs. The manual tells me that a flashing red LED on the circuit board means a 'pumped return thermistor failure'. Unfortunately I can't seem to find out where the thermistor is or even what it...

Hi all, I am working on a potterton heat max 28HE that has no hot water (hot tap runs cold but boiler fires up when the hot tap is on and hot water is sent to the valve) this boiler seems to be identical to the baxi deo tech? I have looked over many threads and had a convocation with a guy on...

Hi, I hope somebody can give me some advice as I am running out of ideas. I have a Potterton Performa 28i that only gives warm/cold water. I have changed the DHW plate heat exchanger along with all the bits I could get to on the diverter valve. (both diaphragms and the main needle valve). The...