no power

  1. E

    Shed Consumer Unit no power

    Two years ago I had a consumer unit fitted in the shed to supply a LED bulk head light and double socket. In the consumer unit I have three switches: one for socket, one for light and the main switch. I wanted to change the light and when wiring it up (with all power off of course) I made a...
  2. Chaseterrace

    Hive Gen 3 - Lost power to boiler

    Hi, I have purchased and attempted to install a Hive Gen 3. The existing set up was a thermostat (Drayton Tempus 7) and a WR 1 thermometer. Looking at the existing install and the wiring diagrams with the hive booklet I have assessed that I have an S-Plan configuration. So I have powered...
  3. C

    WB Heatslave ii not powering up

    After switching my consumer unit off temporarily to check a switch, my boiler (oil WB Greenstar Heatslave ii combi, only a few months old) won't come back on. The LCD is blank and the wireless thermostat had a Fault A21 which just means it can't find its friend. Any ideas? I've checked the FCU...
  4. A

    rcd keeps tripping nothing plugged in - please help!

    Hi All, On Saturday night about 1am (give or take a couple of hours) our RCD tripped, if we turn the socket breaker off then the main RCD will stay on, (lights kitchen etc) Our kitchen units are on a separate breaker so it won’t be the fridge/freezer. We have unplugged all appliances taken...
  5. R

    Vivaro 1.9 diesel glow plug light on

    Hi all, I have been having some problems with my Vivaro 1.9 cdti 2006 100bhp 6 speed. Where the glow plug heater light has been flashing on and off and losing all power. I have read alot of post with several other members having very similar problem. I have diagnosed the problem and wanted to...
  6. O

    Bosch washer, shuts down for 72hr between washes

    I have a recurring issue with my bosch logixx 7 integrated washing machine. After completing a wash, if I switch the washer off it will not swtich on again for around 72hrs. When I select a programming using the dial nothing happens, no lights etc. It is as if the washer is dead. After approx...
  7. L

    Electrics/consumer unit problems

    The other day I put a junction box in my lighting circuit. The circuit was off (it was tripped but the circuit breaker was in place), but when I went to turn it on the power wouldn't come back on. Trouble shooting wasn't obvious: power was going into the circuit breaker, it appeared to be...
Top