10mm not 15mm ‍♂️

[mjtefc9]

Divy here thought his cold water feed was 15mm.. so bought a 15mm - 1/4" reducing tee to plumb a fridge.

It's 10mm!! I've already cut it so stuck a stop end on.

What options do I have as I can't find a 10mm - 1/4" reducing tee...

Do I get some 15mm pipe and use 15mm - 10mm reducers ?

‍

 

[Madrab]

Unlucky but the clue is written on the side of the pipe in red

Are you sure it's 1/4" and not 6mm? If it's 6mm you'll find some alternatives

 

[mjtefc9]

Unlucky but the clue is written on the side of the pipe in red

Are you sure it's 1/4" and not 6mm? If it's 6mm you'll find some alternatives

Says 1/4 on the pipe supplied with the fridge ‍

 

[thomp1983]

If you can't find the right 10mm to 1/4" fitting then yes take the 10mm upto a small amount of 15mm and use the fitting you have, it's a bit of a cumbersome way of doing it but you can only work with what's available