1300 p plus and 600 single rad

[CAESAR32]

Will 15mm pipe be ok supplying a 1300 p plus and a 600 single rad. Or should I tee off the main run twice?

 

[Terrywookfit]

It will be fine.

 

[CAESAR32]

Centrall Heating

• CAESAR32
• 13 Mar 2016

Centrall Heating

• CAESAR32
• 13 Mar 2016

this is the lay out I have

 

[CAESAR32]

IMG_20160311_163628

• CAESAR32
• 13 Mar 2016

Like that but a rad either side of the main run in the same joist section. Suppose I could drop down to a 15mm tee. Flowing in the branch of the tee and splitting off both ways.

 

[CAESAR32]

Sound ok?

 

[CAESAR32]

Will the central heating be ok heating off the main 22mm run and flowing in to the branch of a 15mm tee and splitting both ways with a rad to pick up off both legs of the tee?

 

[CAESAR32]

Central Heating Pipework Layout

• CAESAR32
• 20 Mar 2016

would it be ok piped like that, or would it be best to tee off separately of the main run for each rad?

 

[CAESAR32]

Or is both as good?