2 pole voltage tester/indicator recommendations? GS38?

Joined
5 Nov 2024
Messages
6,205
Reaction score
2,959
Country
United Kingdom
I am thinking of purchasing another 2 pole voltage tester as my Di-log combi volt, although still working, I accidentally damaged the probe tips. I know that they’re better protected with GS38 tips, but believe it’s not compulsory? I have tried others which don’t sound when testing on voltages, but I like it, unsure why.

There’s some mixed reviews about longevity of some. I’m aiming to spend around £30. I am looking at a Fluke T90 currently on eBay advertised as new. I can also get a Kewtech KT1710 for around £35.

For non-acoustic (but oddly I like that feature) I can get a Benning Duspol for £24 on Amazon, but not GS38

Any help/recommendations appreciated
 
Don't think I ever really liked the combined voltage and continuity w\audio setups

Prefer the simple voltage testing with the single pole testing as an addition
 
I have a compliant tester, 1794957023910.pngalthough not the proving unit, I hardly ever use it, I know to be compliant means no batteries, and no selector switches, so it can't suffer from discharged batteries or be turned to the wrong range, but to be frank the proving unit was not really any good, as it simply gave a 500 volt output, to light all lamps, and really it should test at 50 volt or less to prove it will work with any low voltage supply, and 75 volts DC or below in case a DC supply, so really it was not fit for purpose so used the car jump starter pack with a 230 volt outlet instead, could not see reason for buying the official tool.

I do not want to carry a load of test equipment around with me, so I make do with one of these, Diffrence line neutral 8 Feb 24 reduced.jpg as it does so much, it would not have been permitted in some of the chemical plants I have worked in, they insisted on the Martindale tester and proving unit, in spite of the proving units faults, not to have them with you would result in removal of site pass, in other words the sack for not having one, so I carried one all the time.

In Hong Kong my tester was LED type, again no battery or buttons, and I filled it with re-enterable compound to ensure it could not fill with water.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top