Hello there, I have recently purchased a Countax C800H 4x4 mower with known issues. The main problem Is that the electric deck lift is broken. I have checked the lifting ram by applying 12v to the correct pins in the plug and can get it to lift and lower by changing polarity. Have just fitted a £100 new Deck height module Of which made no change to the problem, still doesn't move with the dial on the dash. Now the dial is £200 for some reason as it's only a tiny part. Is it likely that it's the dial at fault? Can it be tested in any way?
2009 Countax C800H 4x4 Deck lift problems.
- Thread starter ademco
- Start date
Sponsored Links
Don't know if this is any help
Have a look at the circuit board behind the dash and inspect for any burnt components - and there is a fuse or two.
Hell of a bit of kit, this one!
John
Hell of a bit of kit, this one!
John
Sponsored Links
- Joined
- 5 May 2022
- Messages
- 1
- Reaction score
- 0
- Country
Hi, did you get a solution to to this as I have the same problem with my 800 deck?
And can I ask which pins responded to the actuator 12v test?
Thank you. COLIN
And can I ask which pins responded to the actuator 12v test?
Thank you. COLIN
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
