Hi all. I have a dilemma I need to sort out rapidly. I went to replace my bath taps as the ones on there were ridiculously old. The taps were stuck on with red led so I also ordered a 22mm flexi hose so I could cut the pipework and get a box spanner in there (3/4 standard tap end) however, I then noticed the pipe I was going to attach it to is old imperial 3/4" so the olive would be quite slack. Is there any possible way I can connect my 3/4" tap to this bloody 3/4" pipe?
I've looked everywhere, I've even done the PTFE tape trick but the flexihose flew off and flooded the place lol.
I've looked everywhere, I've even done the PTFE tape trick but the flexihose flew off and flooded the place lol.