Purchased a 30W PIR LED floodlight from Screwfix this weekend, simple cable swap but it trips the MCB every time it comes on.
The lighting circuit is on a B6 breaker.
No continuity between any of the wires.
The lamp works fine on a different power supply, I haven't tested a higher current MCB circuit yet.
Is it likely to be the MCB or is something else going on?
The lighting circuit is on a B6 breaker.
No continuity between any of the wires.
The lamp works fine on a different power supply, I haven't tested a higher current MCB circuit yet.
Is it likely to be the MCB or is something else going on?